上海江尚塑胶材料有限公司
聚乙烯HDPE现货 采购认准江尚塑胶, 上海江尚塑胶专业从事国内外塑胶原料进出口销售及批发业务,塑胶原料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!
【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等。
| HDPE | 美国陶氏 |
| 美国陶氏HDPE: | ||
| CONTINUUM? DGDA-2490 NT | 挤出管材 | A bimodal polyethylene resin produced using UNIPOL? II process technology for pipe applications including natural gas distribution pipes, industrial piping, mining, sewage, fittings and municipal water service. Utilized where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. |
| CONTINUUM? DGDA-2492 NT | 挤出管材 | A bimodal polyethylne resin produced using UNIPOL? II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include large diameter industrial piping, mining, sewage, and municipal water service lines and fittings. |
| CONTINUUM? DGDA-2502 NT | 挤出管材、注塑 | A bimodal polyethylene resin is produced using UNIPOL? II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include large diameter industrial piping, mining, sewage, and municipal water service lines. |
| CONTINUUM? DGDC-2480 NT | 挤出管材 | A bimodal polyethelyne resin produced using UNIPOL? II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. |
| CONTINUUM? DMDC-1250 NT 7 | 压塑、注塑 | An organoleptic bi-modal HDPE for compression and injection molded presurized beverage closures where superior balance of stiffness and ESCR is required. |
| CONTINUUM? DMDD-6620 | 吹塑、压塑 | A pharmaceutical bi-modal HDPE designed for CBF, IBM, and EBM blow molding processes for light weight pharmaceutical bottles. |
| CONTINUUM? DMDE-1250 NT 7 | 压塑、注塑 | An organoleptic bi-modal HDPE for compression and injection molded presurized beverage closures where superior balance of stiffness, ESCR, and slip is required. |
| DOW? DMDA-8007 NT 7 | 流延膜、薄膜挤出、注塑 | A high density polyethylene homopolymer resin for injection molding applications such as crates, cases, totes, in addition to cast film extrusion. |
| DOW? DMDA-8904 NT 7 | 注塑 | A high density polyethylene resin is produced via UNIPOL? Process Technology from Dow and is designed for injection molding applications such as pails, industrial parts, shipping containers, as well as cast film extrusion applications. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress-crack resistance, and impact strength. |
| DOW? DMDA-8907 NT 7 | 注塑 | A high density polyethylene resin is produced via UNIPOL? Process Technology from Dow and is designed for injection molding applications such as pails, industrial parts, shipping containers, and industrial parts. This resin has been designed to provide excellent processability for molders and to meet the rigorous performance characteristics of applications requiring stackability, environmental stress-crack resistance, and impact strength. |
| DOW? DMDA-8920 NT 7 | 注塑 | A high density polyethylene resin designed for injection molding applications that require an excellent balance of processability and molded part properties. |
| EVERCAP? DMDA-1260 NT 7 | 压塑、注塑 | An organoleptic bi-modal HDPE for compression and injection molded beverage closures for applications that use hot fill or aseptic sterilization processes. |
| EVERCAP? DMDD-1210 NT 7 | 压塑、注塑 | An organoleptic HDPE with slip for use in compression and injection molded beverage closures for flat water or for beverages that use a hot fill process. |
| UNIVAL? DMDA-6147 NT 7 | 吹塑 | A high density polyethylene resin for blow molding applications such as large part blow molding with great parison melt strength and stress crack resistance. |
| UNIVAL? DMDH-6400 NT 7 | 吹塑 | A multi-purpose, high denisty polyethylene homopolymer resin for blow molding applications such as blow molded containers used to package dairy, water, and fruit drinks. |
| CONTINUUM? DGDA-2420 NT | 挤出管材 | Bimodal polyethylene resin with a UV stabilizer for outdoor storage that provides outstanding resistance to both slow and rapid crack growth in natural gas pipe, irrigation, and drip tube applications . |
| CONTINUUM? DGDA-2490 BK | 挤出管材 | This is produced using UNIPOL? II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstandingresistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gasdistribution pipes, industrial piping, mining, sewage, and municipal water service lines. |
| CONTINUUM? DMDC-1270 NT 7 | 压塑、注塑 | High density polyethylene resin with excellent stiffness, impact strength, and stress crack resistance used in compression and injection molded closure applications such as carbonated soft drinks . |
| DOWLEX? IP-10 | 注塑 | High density polyethylene resin specifically designed for reusable case applications such as fast food and beverages offers excellent processability and easier flow at low temperatures . |
| DOWLEX? IP-40 | 注塑 | High density polyethyelne resin for food container applications designed to offer the excellent processing and impact resistance . |
| DOW? 04852N | 注塑 | High density polyethylene resin that provides good impact strength, toughness, stiffness, and processability for mold injection applications such as industrial parts and shipping containers . |
| DOW? 06448N | 压塑、注塑 | High density polyethylene resin with excellent impact resistance, stress crack resistance, and processability used in injection molding applications, roll-out trash cans and other large parts . |
| DOW? 08262B | 注塑 | High density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized |
| DOW? 08452N | 注塑 | A a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness combined with good stiffness. This resin has good processability over a wide range of molding conditions. It is intended for use in injection molding applications such as pails, industrial parts and other shipping containers it can also be used for structural foamed parts. The main characteristics are: excellent impact strength and toughness, good stiffness, for injection molded ... |
| DOW? 08454N | 注塑 | A narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions. For structural foams, industrial containers, cases and crates. Offers excellent impact strength, toughness and good stiffness. |
| DOW? 10462N | 注塑 | A narrow molecular weight distribution, high density homopolymer designed to provide excellent stiffness, low warpage, acceptable toughness, and good moldability. This resin is ideally suited for injection molding crates, cases, trays, tote bins, and other objects requiring high rigidity and offering excellent processability over a wide range of molding conditions. The main characteristics are: excellent stiffness / modulus, excellent warp resistance, designed for tote boxes, industrial ... |
| DOW? 17450N | 注塑 | For toys and housewares. Offers good low temperature impact strength, gloss and excellent toughness. This product is a narrow molecular weight distribution co |
| DOW? 25055E | 注塑 | High density polyethylene resin that provides high gloss, high surface finishing, and excellent mechanical properties for houseware, food container, and toy injection molding applications |
| DOW? 25455N | 注塑 | A narrow molecular weight distribution copolymer designed to offer good ESCR and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions. For housewares, toys, medical applications. Has good ESCR, gloss and excellent toughness. |
| DOW? DGDB-2480 NT | 挤出管材 | This product is produced using UNIPOL? process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE345464A - Black - PE345464C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 |
| DOW? DGDC-2100 NT 7 | 吹膜 | A high-molecular weight, high-density film grade resin. This product was specifically designed to offer an optimal balance of physical properties and processabilitiy. It is ideally suited for use in making grocery sacks, consumer and institutional liners, and merchandise bags. |
| DOW? DGDP-6097 NT 7 | 薄膜挤出 | A medium molecular weight, high-density polyethylene copolymer that has been designed specifically for tubular film extrusion. Its broad molecular weight distribution and density successfully combine excellent performance at high extrusion rates with high film strength and rigidity. Tubular films of this product are recommended for high-strength grocery sacks, shopping bags and notion and millinery bags. The excellent drawdown characteristic of this product permits production of ... |
| DOW? DMDA-8950 NT 7 | 注塑 | This product is produced via UNIPOL? Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. The main characteristics of this product are injection molding, for injection molded thin-wall food containers, including freezer applications, high flow for processing ease and very narrow .. |
| DOW? DMDA-8965 NT 7 | 注塑 | This is used for injection molding, injection molded thin-wall food containers. It has excellent processability, good impact strength and rigidity, very narrow molecular weight distribution. |
| DOW? GRSN-6001 NT | 异性材挤出 | A granular product intended for use in the production of blends, such as color concentrates, master batches and plastic wood composites and produced using UNIPOL? process technology |
| DOW? HDPE DGDA-2484 NT | 挤出管材 | A High Density Polyethylene Resin material. It is available in North America for profile extrusion. Primary use of this product is as a processing aid. |
| DOW? HDPE KS 10100 UE | 注塑 | A high density polyethylene resin designed to exhibit improved processability, excellent impact strength, stress crack resistance and UV stability for outdoor use, at minimum warpage. Applications: - Waste bins. - Large containers. - Tough parts. |
| DOW? HDPE KT 10000 UE | 注塑 | A UV stabilised resin with very narrow molecular weight distribution. It was developed to impart excellent stiffness, combined with good impact strength to injection moulded parts, at minimum warpage. Applications: - Cases and boxes for industrial parts. - Farm produce and beverage crates. - Pails and buckets. |
| DOW? HDPE NG 7000 H | 吹膜、挤出管材 | |
| UNIVAL? DMDA-6200 NT 7 | 吹塑 | This product offers excellent stress crack resistance and rigidity, high impact strength, moderate swell and high melt strength. |
| UNIVAL? DMDA-6230 NT 7 | 吹塑 | This product offers outstanding environmental stress crack resistance, high impact strength and good extrusion characteristics. |
| UNIVAL? DMDC-6145 NT 7 | 吹塑 | - Outstanding environmental stress crack resistance - Excellent parison melt strength / low sag - Good extrudability / processability - Good rigidity |
