1.产品用途
该钢筋弯曲试验机用于检测直径不大于40mm的钢棒、铝棒的抗弯性能,弯曲支座之前的距离可调节。根据不同尺寸钢筋,可配备不同的抗弯冲头,适用于HRB335,HRB400,HRB500钢筋。
2.试验标准
GB/T232金属材料 弯曲试验方法 metallic materials---bend test
ISO 7438 metallic materials---bend test
GB/T1499.1 钢筋混凝土用钢 第1部分:热轧光圆钢筋 steel for the reinforcement of concrete---part 1:hot rolled plain bars
ISO6935-1 steel for the reinforcement of concrete---part 1: plain bars
GB/T1499.2钢筋混凝土用钢 第2部分:热轧带肋钢筋 steel for the reinforcement of concrete---part 2:hot rolled ribbed bars
ISO 6935-2 steel for the reinforcement of concrete---part 2:ribbed bars
GB/T28900 钢筋混凝土用钢材试验方法test method of steel for reinforcement of concrete
ISO 15630-1 steel for the reinforcement and prestressing of concrete---test methods---part 1:reinforcing bars,wire rod and wire
GB/T21839预应力混凝土用钢材试验方法 test methods of steel for prestressing concrete
ISO 15630-3 steel for the reinforcement and prestressing of concrete---test methods---part 3:prestressing steel
YB/T5126 钢筋混凝土用钢筋 弯曲和反向弯曲试验方法 steel bars for reinforcement of concrete---bend and rebend testst
ISO 10065 steel bars for reinforcement of concrete---bend and rebend tests
3.技术参数
序号 |
项目 |
技术参数 |
1 |
试样直径范围 |
不超过40mm |
2 |
液压系统工作压力 |
28MPa |
3 |
弯曲力 |
100kN |
4 |
弯曲跨距范围 |
0-600mm |
5 |
弯曲支辊直径 |
Φ100mm |
6 |
弯曲支辊长度 |
100mm |
7 |
弯曲试验速度 |
1-160mm/min |
8 |
弯曲试验空间 |
500mm |
9 |
正向弯曲试验角度 |
90度 |
10 |
反向弯曲试验角度 |
20度 |
11 |
活塞行程 |
350mm |
12 |
加载方式 |
液压加载 |
13 |
电机功率 |
1.1kw |
14 |
工作电压 |
380VAC±10%, 50Hz |
15 |
主机尺寸 |
800*630*1900mm |
4.可选弯曲试验冲头
Φ6, Φ7, Φ8, 10,Φ12,Φ14,Φ16,Φ18,Φ20,Φ22,Φ24,Φ25,Φ28,Φ30,Φ32,Φ36,Φ40,Φ42,Φ44,Φ48,Φ50,Φ54, Φ56,Φ60,Φ64, Φ66,Φ72,Φ75, Φ80,Φ84, 88,Φ92,Φ96,Φ100,Φ108,Φ112,Φ120,Φ125,Φ128,Φ132,Φ136,
Φ140,Φ145,Φ150,Φ160,Φ164,Φ168,Φ180,Φ192,Φ200,Φ204,Φ224,Φ240,Φ250,Φ270,Φ280,Φ290,Φ310,Φ320,Φ328,Φ350,Φ400,Φ450等