概  述 ：(欢迎拨打，咨询热线：13928887694)

采用活塞式定量原理，集机电、气动于一体。PLC控制、人机界面、结构紧凑、操作方便，灌装精度高，防滴漏效果好，运行稳定可靠，广泛适用于各种流体、半流体、粘稠体的定量灌装。

On the principle of piston quantitative, integrating mechanical and electrical, pneumatic. PLC control, man-machine interface, compact structure, convenient operation, high filling precision, drip tight effect is good, operation is stable and reliable, widely used in all kinds of fluid, semiliquid, viscous body filling the quantitative.

适用范围 ：

食品、医药等各种玻璃瓶装、浓稠而含颗粒的酱体、膏体的灌装，如辣椒酱、番茄酱、果酱、药膏等物料 ；

Scope of application: food, medicine and other glass bottles, thick and granular paste, paste filling, such as pepper sauce, tomato sauce, jam, ointment and other materials;

特  点 ：

◆每个缸筒独立气缸驱动，可实现每个灌装筒独立工作，独立调整灌装量，并且我司经过多年经验，把气缸安装在设备顶部，该设计可有效防止气缸被腐蚀，方便操作人员清洗设备；

◆可定制成环保外框，防止物料溅出设备外面，若外框打开，设备自动停机；

◆设备具有自动检测故障故能，如出现故障，设备自动报警，并且在触摸屏上出现提示，操作人员根据故障提醒可快速排除故障，不耽误生产。

◆Each cylinder cylinder driving independently, which can realize each filling canister work independently, independently adjust the filling quantity, and our company after many years of experience, the cylinder installed on the top of the device, this design can effectively prevent the cylinder corrosion, convenient cleaning equipment operators;

◆Can be made into frame of environmental protection, prevent material spill equipment outside, if open frame, automatic stop device;

◆Equipment has automatic detection fault reason can, such as failure, equipment automatic alarm, and prompted the touch screen, operation personnel according to the failure to remind can be quickly ruled out fault, don"t delay the production.

技术参数：

灌装头数： Filling  quotas	4	6	8	10	12
灌装速度： Filling   speed	20	35	45	60	75
气源电源： Air  power	气  源：0.4-0.6mpa ;  电 源：220v/HZ souce:0.4-0.6mpa ;    power  supply ：220v/HZ
灌装精度： Filling accuacy	±1% Is  better than that  of  plus  or  minus  1%

欢迎拨打，咨询热线：13928887694