商品 详情
上海颐品代理wiska金属呼吸电缆接头Wiska SPRINT® EMSVG, VentGLAND, brass

¥ 129.8

  • ≥ 100 起订量
  • 10000只 总供应
  • 上海 辖区 所在地
上海颐品自动化科技有限公司
产品详情

Wiska代理商:Wiska cable gland-上海颐品自动化科技有限公司

Wiska SPRINT  EMSVG, VentGLAND, Brass, metric, EN 62444

WISKA呼吸金属电缆接头-黄铜镀镍

We take the pressure off

Being a pioneer in the development of breathable cable glands, WISKA today is an expert for breathable components avoiding condensation.

With the launch of the VentGLAND? in 2007, the world"s first cable gland with pressure equalisation, WISKA set new benchmarks. VentGLAND? cable glands and VentPLUG pressure equalisation units are nowadays being used around the world, especially in sectors that are moisture and temperature sensitive such as shipping, and the lighting and solar industries.

Wiska VentGLAND? Cable glands

The VentGLAND? combines pressure equalisation and cable gland in a single unit and features high air flow rates as well as high water protection capacity.

The breathable VentGLAND? cable glands are a part of the tried and tested modular SPRINT system. The VentGLAND? can easily be used to replace standard cable glands due to its identical clamping ranges and compatibility with all cap nuts and ranges of multiple and special sealing inserts. The product portfolio is rounded off with VentGLAND? cable glands with EMC-inserts for protection against electromagnetic interference.

Wiska new VentPLUG Pressure equalisation units

The VentPLUG is used when a cable gland with an additional pressure equalisation unit is required to vent the enclosure.

Pressure equalisation units from WISKA are now also available in thread sizes M 20 and M 40, in addition to M 12. Both feature a flat, space-saving design to enable flexible usage. Thanks to an improved membrane, the air flow rate of the new VentPLUG in the sizes M 20 and M 40 has more than doubled. The high air flow version even achieves a 2.5 times higher value.

Your benefits with Venting products by WISKA

WISKA products are build of highest quality and made for most demanding conditions. Our Venting products offer:


  • Effective pressure equalisation


  • Protection against condensation


  • Protection against contaminants


  • High operational safety


  • Increased profitability


  • Wide product range


  • Ideal for roughest conditions

Venting solutions for every application

The diversity of our products provide venting solutions for a broad range of applications. Thread sizes include M 12 to M 63 with a wide range of materials such as polyamide, brass and stainless steel. Completed by their high protection classes of IP 68 and 69, venting products by WISKA appear to be true multitalents. On top of that, they have application specific membranes with different air flow rates and robust properties such as resistance to UV, salt water and aggressive chemicals.

WISKA offers many years of experience and working with customers to provide solutions that meet any individual requirements. You may also use our venting calculator to compute the optimal application of our pressure equalisation products.

德国Wiska尼龙电缆接头系列(UL认证
德国Wiska代理商:上海颐品自动化科技有限公司

关键词:德国Wiska电缆接头,Wiska尼龙电缆接头,Wiska金属电缆接头,

Wiska防爆尼龙电缆接头,Wiska防爆金属电缆接头,Wiska屏蔽电缆接头,

Wiska尼龙螺母,变径接头,闷盖;Wiska金属螺母,变径接头,堵头等

WISKA SPRINT EMSVG, VentGLAND, brass, metric, EN 62444

Protection class: IP68 / IP69 
Temperature range: -40 °C - 100 °C 
Material: Gland Brass nickel-plated, Gasket EPDM, Clamping cage Polyamide, Membrane ePTFE

SPRINT? EMSVG, VentGLAND?, brass, metric, EN   62444



WISKA 产品型号 产品材质 螺纹长度 螺纹规格 卡紧范围 扳手度 整体长度 包装单位
10065899 EMSVG 16 Nickel-plated 6 mm M 16x1,5 4,5 mm - 10 mm 20 mm 34 mm - 42 mm 1
10065900 EMSVG 20 Nickel-plated 6 mm M 20x1,5 6 mm - 13 mm 24 mm 41 mm - 50 mm 1
10065901 EMSVG 25 Nickel-plated 7 mm M 25x1,5 9 mm - 17 mm 29 mm 43 mm - 52 mm 1
10065902 EMSVG 32 Nickel-plated 8 mm M 32x1,5 13 mm - 21 mm 36 mm 47 mm - 56 mm 1
10065903 EMSVG 40 Nickel-plated 8 mm M 40x1,5 16 mm - 28 mm 46 mm 57 mm - 70 mm 1
10065904 EMSVG 50 Nickel-plated 9 mm M 50x1,5 21 mm - 35 mm 55 mm 64 mm - 77 mm 1
10065905 EMSVG 63 Nickel-plated 10 mm M 63x1,5 34 mm - 48 mm 68 mm 69 mm - 83 mm 1

Cable glands with pressure equalisation

Breathable cable glands that work against the formation of condensation

Electrical installations and moisture do not go well together. They lead to power failures in electrical casings, sensors and electrical devices. The danger of short circuits – and thus electrical breakdowns, shortages and disruption of operation – increases wherever there is water. In order to find a solution to this problem, it is necessary to understand how condensation forms.

How does condensation form?

Pressure, temperature and air moisture are constantly changing. Even electrical installations, which must be secured in sealed casings in order to be protected against moisture, are subject to the formation of condensation. The reason: Whether caused by climate or operational conditions, fast fluctuations in temperatures create a disparity in pressure between the inside and outside of the casing. This happens when there is rain, wave impact or entry to a tunnel. Because of the vacuum inside the casing, moist air from outside is sucked in, i.e. through the casing’s seal. Inside the casing, the moist air condenses and causes corrosion or a short circuit.

How does condensation enter the casing?

  1. The casing becomes warm when in use.

  2. There may be a temperature difference between the inside and outside of the casing at night or after being shut off. The temperature difference creates a vacuum which causes air to flow in from the outside.

  3. If the air inside of the casing cools down and pressure equalisation does not occur, condensation will form and become trapped which can cause an electrical breakdown or short circuit.

Why Venting?

Hermetically sealed enclosures are insufficient to protect electrical installations from moisture and contaminants. Fluctuating temperatures and environmental factors, especially during outdoor usage, create pressure inside tightly sealed enclosures. This leads to a build-up of condensation as well as damage to the seal that can result in the penetration of moisture and dirt.

Breathable venting products from WISKA ensure effective pressure equalisation between the interior and exterior. This reduces stress on the seal and maintains the enclosure′s protection classes. Venting products from WISKA therefore help to increase operational safety and extend the service lives of electrical installations. This has a sustaining positive effect on maintenance costs.





德国Wiska尼龙电缆接头系列(UL认证

德国Wiska代理商:上海颐品自动化科技有限公司

WISKA 产品型号 螺纹规格 产品颜色 螺纹长度 卡紧范围 扳手度 整体长度 包装单位
10066410 ESKV 12 M 12x1,5 RAL 7035 9 mm 3 mm - 7 mm 16 mm 29 mm - 34 mm 50
10066411 ESKV 16 M 16x1,5 RAL 7035 9 mm 4,5 mm - 10 mm 20 mm 31 mm - 37 mm 50
10066412 ESKV 20 M 20x1,5 RAL 7035 10 mm 6 mm - 13 mm 24 mm 36 mm - 45 mm 50
10061789 ESKV 20 PLUS M 20x1,5 RAL 7035 10 mm 7,5 mm - 14 mm 24 mm 36 mm - 45 mm 50
10066413 ESKV 25 M 25x1,5 RAL 7035 10 mm 9 mm - 17 mm 29 mm 38 mm - 47 mm 50
10066414 ESKV 32 M 32x1,5 RAL 7035 12 mm 13 mm - 21 mm 36 mm 42 mm - 51 mm 25
10066415 ESKV 40 M 40x1,5 RAL 7035 12 mm 16 mm - 28 mm 46 mm 52 mm - 65 mm 10
10066416 ESKV 50 M 50x1,5 RAL 7035 14 mm 21 mm - 35 mm 55 mm 59 mm - 72 mm 4
10066417 ESKV 63 M 63x1,5 RAL 7035 15 mm 34 mm - 48 mm 68 mm 64 mm - 78 mm 3
10066120 ESKV 12 M 12x1,5 RAL 9005 9 mm 3 mm - 7 mm 16 mm 29 mm - 34 mm 50
10066121 ESKV 16 M 16x1,5 RAL 9005 9 mm 4,5 mm - 10 mm 20 mm 31 mm - 37 mm 50
10066122 ESKV 20 M 20x1,5 RAL 9005 10 mm 6 mm - 13 mm 24 mm 36 mm - 45 mm 50
10061864 ESKV 20 PLUS M 20x1,5 RAL 9005 10 mm 7,5 mm - 14 mm 24 mm 36 mm - 45 mm 50
10066123 ESKV 25 M 25x1,5 RAL 9005 10 mm 9 mm - 17 mm 29 mm 38 mm - 47 mm 50
10066124 ESKV 32 M 32x1,5 RAL 9005 12 mm 13 mm - 21 mm 36 mm 42 mm - 51 mm 25
10066125 ESKV 40 M 40x1,5 RAL 9005 12 mm 16 mm - 28 mm 46 mm 52 mm - 65 mm 10
10066126 ESKV 50 M 50x1,5 RAL 9005 14 mm 21 mm - 35 mm 55 mm 59 mm - 72 mm 4
10066127 ESKV 63 M 63x1,5 RAL 9005 15 mm 34 mm - 48 mm 68 mm 64 mm - 78 mm 3
10066380 ESKV 12 M 12x1,5 RAL 7001 9 mm 3 mm - 7 mm 16 mm 29 mm - 34 mm 50
10066381 ESKV 16 M 16x1,5 RAL 7001 9 mm 4,5 mm - 10 mm 20 mm 31 mm - 37 mm 50
10066382 ESKV 20 M 20x1,5 RAL 7001 10 mm 6 mm - 13 mm 24 mm 36 mm - 45 mm 50
1865 ESKV 20 PLUS M 20x1,5 RAL 7001 10 mm 7,5 mm - 14 mm 24 mm 36 mm - 45 mm 50
10066383 ESKV 25 M 25x1,5 RAL 7001 10 mm 9 mm - 17 mm 29 mm 38 mm - 47 mm 50
10066384 ESKV 32 M 32x1,5 RAL 7001 12 mm 13 mm - 21 mm 36 mm 42 mm - 51 mm 25
10066385 ESKV 40 M 40x1,5 RAL 7001 12 mm 16 mm - 28 mm 46 mm 52 mm - 65 mm 10
10066386 ESKV 50 M 50x1,5 RAL 7001 14 mm 21 mm - 35 mm 55 mm 59 mm - 72 mm 4
10066387 ESKV 63 M 63x1,5 RAL 7001 15 mm 34 mm - 48 mm 68 mm 64 mm - 78 mm 3


德国Wiska主要产品类别如下:

1、上海颐品-WISKA尼龙电缆接头及附件(Wiska cable gland)

SPRINT尼龙电缆接头及附件:ESKV、ESKV-L、ESKV LT、ESKV-L LT、ESKV-SET、ESKV-RDE、ESKV-F、SKV、NSKV、ESKV、ESKVS-L、SKVS、ESKVZ、ESKVZ-L、EMUG、MUG、EMUF、EVSGS、VSG、KEM、KEP、KRM、KRP、EWI90等系列


首页 电工电气 / 电气设备配件 / 电气设备配附件
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商,但该供应商24 小时未响应情况下,仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验