上海江尚塑胶材料有限公司
找进口聚酰胺尼龙料现货 采购认准上海江尚塑胶, PA(聚酰胺)进口塑料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!
【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等
| AMILAN? Nylon Resin | |||
| List of grade | |||
| Type | Feature | Grade | |
| Nylon6/Unreinforced | High flow | CM1007 | |
| Standard | CM1017 | ||
| High cycle, Low temperature toughness | CM1017XL2 | ||
| High cycle, Heat stability, Low temperature toughness | CM1017XL3 | ||
| High rigidity | CM1017K | ||
| Middle viscosity, Heat stability | CM1026 | ||
| Nylon6/Reinforced | Standard, GF15% | CM1011G-15 | |
| High flow, GF15% | CM1001G-15 | ||
| High flow, GF20% | CM1001G-20 | ||
| Standard, GF30% | CM1011G-30 | ||
| Heat stability, GF30% | CM1016G-30 | ||
| Standard, GF45% | CM1011G-45 | ||
| Heat stability, GF45% | CM1012G-45N | ||
| Low warpage, Mineral filler reinforced | CM1001R | ||
| Nylon6/Flame Retardant | Unreinforced, Non-halogen | CM1014-V0 | |
| Nylon6/Abrasion Resistance | Unreinforced | CM1023G1000 | |
| GF30% | CM1003G30 | ||
| High Impact/Nylon6 | Standard | U121 | |
| Super high Impact | U141 | ||
| GF35% | U127GX07 | ||
| Nylon6/Blow molding | Standard | CM1046 | |
| High viscosity | CM1061 | ||
| High viscosity, High impact | CM1056 | ||
| High viscosity, High impact | CM1046K4 | ||
| GF20%, High viscosity | CM1056K48 | ||
| Nylon6/Extrusion | Standard | CM1021FS | |
| Monofilament | CM1021TM | ||
| Deep drawing | CM1041LO | ||
| Co-polymer Nylon | Standard | CM6041XF | |
| Transparency | CM6021M | ||
| Flexibilty | CM6241M |
