Terblend? N NG-04

Technical Datasheet | Supplied by INEOS Styrolution (INEOS Group)

Terblend? N NG-04 is an acrylonitrile butadiene styrene and polyamide (ABS/PA) blend reinforced with 20 % glass fiber. Possesses high softening temperature, dimensional stability, rigidity and high impact strength at high & low temperature. Exhibits good processability, high melt flow, good surface finish and low shrinkage. Provides acoustic dampening & good resistance to heat and chemicals. Is suitable for processing by injection molding. Used in automotive overhead consoles, electrical/electronics housing and toys, sports & leisure. Complies with UL certification.

ABS/PA TERBLEND N NG-04

General
Material Status	Commercial: Active
Availability	Africa & Middle EastAsia PacificEuropeLatin AmericaNorth America
Filler / Reinforcement	Glass Fiber, 20% Filler by Weight
Features	Good Dimensional StabilityHigh Rigidity
Uses	Automotive ApplicationsHousings
Automotive Specifications
Forms	Pellets
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density		g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR) (240°C/10.0 kg)		cm3/10min	ISO 1133
Molding Shrinkage		%	ISO 294-4
Water Absorption (Equilibrium, 73°F, 50% RH)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield, 73°F)		psi	ISO 527-2
Tensile Strain (Yield, 73°F)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Flexural Stress (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in2
73°F		ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in2
73°F		ft·lb/in2
Notched Izod Impact Strength			ISO 180/A

ABS/PA TERBLEND N NG-04 可提供COA、COC,ROHS.MSDS.UL黄卡等等资料，价格最优，质量保证！

PA/ABS材料的密度也可以降低，其降低幅度可高达6%，从而有效降低了成本。PC/ABS材料的密度相对较高，一般在1.13～1.15范围内，而PA/ABS材料的密度仅在1.07～1.08之间，与耐热性ABS材料相当。

PA/ABS材料的产品流动性非常好，相比其他材料具有更好的加工性，且加工窗口更宽。在各自合适的注塑温度，以及相同的压力和速度的条件下，PA/ABS材料和ABS材料的流长比是PC/ABS材料的近两倍。 

PA/ABS材料的耐化学品性更好，还能够赋予大多数化学品，如汽油、润滑油、冷却剂、植物油、酯类以及醇类等日常用品很好的耐应力开裂性。 

ABS PA 应用：     

ABS PA材料最大的应用市场还是在汽车的内饰件上。由于它天然的哑光性，可以直接应用于内饰件上而无需喷涂。这样不仅大幅降低了成本，也有利于环保。另外，免喷涂不仅可以省去油漆的成本，还能够省去前处理、预涂装以及涂装等繁琐的工艺，从而消除了由于这些环节所产生的废品和运输费用等，大大降低了产品的不良率。