上海江尚塑胶材料有限公司
尼龙PA6、PA66塑料现货 采购认准江尚塑胶, 上海江尚塑胶专业从事国内外塑胶原料进出口销售及批发业务,塑胶原料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!
【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等
| 日本宇部尼龙塑料： | ||||||||||
| 1.Injection | 注塑级 | 2.Extrusion | 挤出级 | |||||||
| Grade name | Nomenclature according to | Characteristics | TYPE | Base Grade | Melting | Viscosity | Relative | Applicable | ||
| ISO 1874-1 | Temperature(°C) | Number*1 | Viscosity*2 | Process | ||||||
| Polyamide 6 (unreinforced) | ISO 11357 | ISO 307 | JIS K6920-2 | |||||||
| UBE NYLON | 1013B | PA6, M, 12-030 | Standard viscosity | 标准粘度 | Polyamide 6 | 1020 | 220 | 174 | 3.04 | BOPA |
| 1013NW8 | PA6, MR, 12-030N | Standard viscosity, fast cycle | 标准粘度快速循环 | T-die cast | ||||||
| 1013NW9 | PA6, MHR, 14-030N | Standard viscosity, heat stabilized, fast cycle | 标准粘度，热稳定，快循环 | 1022 | 220 | 197 | 3.37 | BOPA | ||
| 1013IU50 | PA6-HI, MH, 14-020 | Standard viscosity, high impact, heat stabilized, black color | 标准粘度，高冲击，热稳定，黑色 | T-die cast | ||||||
| 1018I | PA6-HI, M, 14-010 | Medium viscosity, high impact | 中等粘度，高冲击 | Blown | ||||||
| 1022B | PA6, M, 22-030 | Medium viscosity | 中粘度 | Monofilament | ||||||
| 1030B | PA6, M, 27-030 | High viscosity | 高粘度 | 1024 | 220 | 207 | 3.5 | BOPA | ||
| NAP1400F | PA6, M, 14-020 | Low water absorption, low density | 低吸水低密度 | T-die cast | ||||||
| Polyamide 6 (reinforced) | Blown | |||||||||
| UBE NYLON | 1015GC3 | PA6, M, 14-060, GF15 | Reinforced with glass fiber 15%, natural color | 玻璃纤维增强15%，天然颜色 | 1030 | 220 | 252 | 4.08 | T-die cast | |
| 1015GC6 | PA6, M, 14-100, GF30 | Reinforced with glass fiber 30%, natural color | 玻璃纤维增强30%，天然颜色 | Blown | ||||||
| 1015GC9 | PA6, M, 14-140, GF45 | Reinforced with glass fiber 45%, natural color | 玻璃纤维增强45%，天然颜色 | Co-polyamide | 5023 | 196 | 172 | 3.04 | T-die cast | |
| 1015GNK | PA6, MH, 14-100, GF30 | Reinforced with glass fiber 30%, black color, heat stabilized | 玻璃纤维增强30%，黑色，热稳定 | (6/66) | 5033 | 196 | 249 | 4.05 | T-die cast | |
| 1015GNKF | PA6, MH, 14-100, GF30 | Reinforced with glass fiber 30%, black color, high flow, heat stabilized | 玻璃纤维增强30%，黑色，高流动，热稳定 | Blown | ||||||
| 1015RXN | PA6, M, 14-080N | Reinforced with mineral fillers 35%, good surface finish | 用矿物填料增强35%，良好的表面光洁度 | Monofilament | ||||||
| 1013R550A | PA6, M, 14-060N | Reinforced with mineral fillers 25%, good surface finish, black color | 增强矿物填料25%，良好的表面光洁度，黑色 | 5034 | 192 | 249 | 4.05 | T-die cast | ||
| 1015GU950 | PA6, MH, 14-160, GF45 | Reinforced with glass fiber 45%, heat stabilized, black color | 玻璃纤维增强45%，热稳定，黑色 | Blown | ||||||
| 1015GX78V | PA6, MHL, 14-100, GF33 | Reinforced with glass fiber 33%, heat and UV stabilized, black color | 玻璃纤维增强33%，热和紫外线稳定，黑色 | Monofilament | ||||||
| Polyamide 12 (unreinforced) | Co-polyamide | 6434 | 188 | 249 | 4.05 | T-die cast | ||||
| UBESTA | 3014U | PA12, XH, 16-010 | Low viscosity, heat stabilized | (6/66/12) | Blown | |||||
| 3024U | PA12, XH, 18-010 | Medium viscosity, heat stabilized | Monofilament | |||||||
| 3024NUX | PA12, MHR, 18-020N | Medium viscosity, heat stabilized, fast cycle | Co-polyamide | 7024 | 201 | 140 | 2.63 | T-die cast | ||
| Polyamide 12 (reinforced) | (6/12) | 7034 | 201 | 235 | 3.86 | T-die cast | ||||
| UBESTA | 3020GX6 | PA12, MHR, 18-090, GF13 | Reinforced with fiber, electro conductive, black color | Blown | ||||||
| 3024GC6 | PA12, MH, 18-070, GF30 | Reinforced with glass fiber 30% | Monofilament | |||||||
| 3024GU6L1 | PA12, MHR, 18-060, GF30 | Reinforced with glass fiber 30%, heat stabilized, black color | ||||||||
