Bormed? HG820MO
聚丙烯均聚物
产品说明:
Bormed HG820MO is a resin intended for evaluation for use in Healthcare applications.
Bormed HG820MO is a clarified homopolymer and typically used in injection moulding. Additivation has been optimized to provide good demoulding properties. This polymer is a CR (controlled rheology) grade with narrow molecular weight distribution giving low risk of warpage. Bormed HG820MO can be sterilised with ethylene oxide or steam.
Applications
Bormed HG820MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HG820MO .
Disposable non pre-filled syringes
Laboratory disposable
This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare.
Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.
Special Features
Easy processing
Good transparency
总览 | |
材料状态 |
|
资料 1 |
|
搜索 UL 黄卡 |
|
供货地区 |
北美洲非洲和中东拉丁美洲欧洲亚太地区 |
添加剂 |
|
特性 |
低翘曲性环氧乙烷消毒均聚物可回收材料可控流变用蒸汽消毒窄分子量分布 |
用途 |
实验室器具医疗/护理用品 |
加工方法 |
|
物理性能 | 额定值 |
单位制 |
测试方法 |
密度 |
0.905 |
g/cm3 |
ISO 1183 |
熔流率(熔体流动速率) (230°C/2.16 kg) |
28 |
g/10 min |
ISO 1133 |
收缩率 |
1.0 到 2.0 |
% |