虹德测控技术（上海）有限公司
HONGDE-WD60 Locale temperature Transmitters Control Instrument
Type |
HONGDE-WD60 |
Measure Accuracy |
0.5% of Full Scale ±1 digit |
Display Accuracy |
-1999—9999 digit |
Communications Output |
RS-232 or RS-485，Baud rate 300～9600bp/s |
Explosion Protected Type |
Normal |
Operating Environment |
Relative Temperature≤90％, Temperature -10～50℃ |
Connect Type |
Temperature sensor dia. 8~25 |
HD-WD60RT2BA0S0V1，Warning: Non-engineering designer is not allowed to change any parameters, otherwise the instrument will control in error! Especially, don’t change the proof parameters.
NAME |
DESCRIPTION |
|
Display |
First Display |
.Display temperature |
Alarm Indicator 1 |
.Light on when alarm on |
|
Alarm Indicator 2 |
.Light on when alarm on |
|
Key |
Parameter Setting Selection Key |
.Recording previous set value .Change parameters setting mode in turn .Change display or parameters setting |
Setting Point Decrease Key
|
.Used for increment the value when changing setting continuous depressing will increment quickly |
|
Setting Point Increase Key |
.Used for decrement the value when changing setting continuous depressing will decrement quickly |
|
Setting Left move Key |
.Left moving the digital position to be modified by turns under parameter setting |
|
HD-WD60RT2A1S0V1，Warning: Non-engineering designer is not allowed to change any parameters, otherwise the instrument will control in error! Especially, don’t change the proof parameters.
