上海江尚塑胶材料有限公司
上海江尚塑胶专业从事国内外塑胶原料进出口销售及批发业务,塑胶原料专业供应商,品类齐全,现货供应,闪电发货,价格实惠, 货源稳定,售后完善,欢迎来电订购!
【上海江尚公司主营】：通用塑料,工程塑料,热塑弹体,热固性塑料等
| SABIC? HDPE | |
| Grade | |
| A4046 | SABIC? HDPE A4046 is a medium density HDPE and is typically used for the production of PE-Xb compounds. The additive package has been optimized for the silane grafting process. The typical application of these is the manufacture of PEX pipes for hot and cold water and central heating. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B1054 | B1054 is a High Density Polyethylene specially developed for large blow molding and jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR. |
| B4660 | B4660 grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660: Suitable for Dairy products and Juice Packaging |
| B4660AB | B4660AB grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660AB: Suitable for Water packaging |
| B5202 | SABIC? HDPE B5202 is a material with a high molecular mass, supplied as pellets. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B5205 | SABIC? HDPE B5205 is a material with a semi-high molecular mass, typically used for blow molding of UN certified cans and containers in the range from 10 to 120 liters. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B5206 | HDPE B5206 is high density polyethylene specially developed for large blow molding / Jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR. |
| B5210 | SABIC? HDPE B5210 is a material with a specific molecular weight distribution, typically used for blow molding of light weight UN certified cans from 2 to 20 liters. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B5403 | B5403 is a High Density Polyethylene specially developed for large blow molding / Jerry cans and drums. The material offers and excellent combination of stiffness and ESCR and a high Impact resistance. This grade can be used in food contact applications. |
| B5411 | SABIC? HDPE B5411 is a material with a semi-high molecular mass, additionally thermal stabilized and typically used for blow molding and sheet extrusion. This grade is combining stiffness, toughness with an high ESCR and is typically used for large bottles, cans, technical parts and toys. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B5421 | SABIC? HDPE B5421 is typically used for blow molding consumer packaging up to 5 l, combining a good stiffness with an high ESCR. This grade is typically used for packaging detergents, cleaners, shampoos and cosmetics at a high ESCR demand. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B5429 | B5429 grade is medium molecular weight High Density Polyethylene copolymer. They are primarily intended for blow molding articles of small sizes. B5429 series grades offer excellent combination of toughness, stress cracking resistance, load bearing strength with easy processability. The grade available with antistatic additive is B5429A. |
| B5822 | HDPE B5822 is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength. |
| B5823 | SABIC? HDPE B5823 is typically used for blow moulding of consumer packaging up to 5 l, combining high stiffness and a good ESCR level. This grade is typically used for packaging the majority of household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics, as well as food packaging. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| B6246LS | SABIC? HDPE B6246LS is typically used in food and beverage packaging, offering good purity and organoleptics as well as recycle ability. It combines a high rigidity with very good processing performance, which offers potential for system cost reduction. The grade is typically used for the blow molding of mono as well as multi layer bottles in several food markets, like fresh, pasteurized and ultra heat treated milk, sauces, orange juice, functional drinks, probiotics and other "daily shot" drinks. The material properties offer the possibility to reduce weight at good top load strength. This slip agent free grade is also typically used for the injection molding of caps closures for carbonated soft drinks and sparkling water as well as high environmental stress crack resistant applications, like UN-pails and UN-caps closures. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| BM1052 | BM1052 is a high molecular weight High Density Polyethylene copolymer grade with broad molecular weight distribution. It has excellent processability and exhibits very high impact strength, stiffness and superior environmental stress crack resistance. |
| BM6246LS | BM6246LS is a medium molecular weight High Density Polyethylene homopolymer grade for blow molding applications. It is primarily designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. |
| CC2056 | SABIC? HDPE CC2056 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC? HDPE CC2056 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC253 | SABIC? HDPE CC253 offers a good combination of stiffness, impact resistance, ESCR and organoleptic properties. The typical applications of this grade are mainly injection molding and compression molding of caps for sparkling water and carbonated soft drinks. SABIC? HDPE CC253 does not contain slip agent. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC254 | SABIC HDPE CC254 is state of the art resin prodckuced by ACP technology. It is easy to process on injection molding and compression molding machines. The grade offers good balance of stiffness, toughness and environmental stress cracking resistance properties. |
| CC3054 | SABIC? HDPE CC3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC? HDPE CC3054 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC453 | SABIC HDPE CC453 is a High Density Polyethylene specially developed for the injection and compression molding of caps closures for the packaging of beverages. This grade offers an ideal combination of impact strength, ESCR and meet organoleptic properties requirements. |
| CC453G | SABIC? HDPE CC453G offers a good combination of stiffness, impact resistance, ESCR and organoleptic properties. The typical application of this grade is mainly injection molding and compression molding of caps for still water, slightly carbonated or pressurized drinks, juices or any other non-sparkling drinks. The product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC453SL | SABIC? HDPE CC453SL offers a good combination of stiffness, impact resistance, ESCR and organoleptic properties. The typical application of this grade is mainly injection molding and compression molding of caps for still water, slightly carbonated or pressurized drinks, juices or any other non-sparkling drinks. SABIC? HDPE CC453SL does contain slip agent for an easier opening. It is stabilized against UV light because the slip agent is sensitive to light; sunlight exposure should be avoided. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC860V | SABIC? HDPE CC860V is typically used for the injection molding of high demanding applications, such as caps closures for still water applications. The material offers a good combination of stiffness and impact resistance. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| CC862 | CC862 is a High Density Polyethylene grade specially developed for still water bottle caps that meet organoleptic properties requirements. The material offers an ideal combination of rigidity, impact strength and low warpage properties. |
| F00851 | SABIC? HDPE F00851 is a high molecular weight High Density Polyethylene copolymer grade typically used for blown film applications. It typically offers a good balance between toughness and stiffness, good impact properties with low gel level. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| F00950 | SABIC? HDPE F00950 resin is a high molecular weight, high density polyethylene copolymer. The design of the product, molecular architecture and density, gives F00950 a good balance of easy extrusion and high melt strength with strong physical properties. SABIC? HDPE F00950 is typically used for production of thin films with good strength and rigidity. The material contains anti-oxidants. SABIC? HDPE F00950 resin is typically used for blown film extrusion and production of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. SABIC? HDPE F00950 can be extruded on conventional HMW-HDPE equipment with temperature settings between 200 and 220°C. Film properties have been measured at 25 μm films with a BUR = 4.Film has been produced on Kiefel IBC film blown line at 160 kg/h with a die of 150 mm, die gap of 1.2 mm and a frostline height of 150 cm (= 10D). This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| F00952 | SABIC? HDPE F00952 resin is a high molecular weight High Density Polyethylene copolymer which has been designed specifically for blown film extrusion. It has broad molecular distribution and high density combine succesfully to give excellent extrudability with high film strength and rigidity. The material contains anti oxidant. ApplicationSABIC? HDPE F00952 resin isrecommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. Films of this poduct are readily treated and printed to give high quality graphics.Processing conditionsSABIC? HDPE F00952E can be extruded on conventional HMW-HDPE equipment at melt temperatures between 200 and 235 °C.Film propertiesFilm properties have been measured at 15 μm blown film with a BUR = 4. |
| F00952J | SABIC? HDPE F00952J resin is a high molecular weight, TNPP free high density polyethylene copolymer. The design of the product, molecular architecture and density, gives F00952J a good combination of easy extrusion and high melt strength with strong physical properties. Typical applications are thin films with excellent strength and rigidity. The material contains anti-oxidants. SABIC? HDPE F00952J resin is typically used for blown film extrusion and production of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. SABIC? HDPE F00952J can be extruded on conventional HMW-HDPE equipment at melt temperature settings between 200 and 220 °C. Film properties have been measured at 15 μm blown film with a BUR = 4. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| F01552 | SABIC? HDPE F01552 is a medium molecular weight High Density Polyethylene specifically designed for blown film extrusion. It has a broad molecular weight with excellent extrudability， high film strength and draw down characteristics. The material contains anti oxidant. |
| F04660 | SABIC? HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| F0863 | SABIC? HDPE F0863 resin is a homopolymer with a very high density manufactured by gas phase technology. The grade offers high stiffness, high temperature resistance, low water vapor transmission and a very low gel level. Because of the linear character it is advisable to use the material in combination with extrusion coating LDPE grades like SABIC? LDPE 2005EC in order to improve extrusion coating process ability (motor load and Neck In). SABIC? HDPE F0863 is typically used for food packaging, release paper and photographic paper. Film properties have been measured at cast film of 25 μm. Water vapor permeability at 38 °C and 100 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| F4520 | SABIC? HDPE F4520 is typically used for blow molding packaging up to 20 l, combining medium stiffness with a good ESCR. This grade is typically used for packaging of aggressive detergents and technical articles such as spare fuel tanks, air- and cable ducts. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| FI0750 | SABIC? HDPE FI0750 is a high molecular High Density Polyethylene copolymer grade typically used for blown film applications. SABIC? HDPE FI0750 features are balance between toughness and stiffness, good impact properties with low gel level. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| FI1157 | SABIC? HDPE FI1157 is a High Density Polyethylene copolymer grade typically used for blown film applications. It has high molecular weight, broad molecular weight distribution and high density to produce film with low gels level, high stiffness, high melt strength, high impact resistance and with narrow gauge tolerances at low film thickness. SABIC? HDPE FI1157 can be processed at high throughput with good bubble stability. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. |
| FJ00952 | FJ00952 is TNPP additive free grade, high molecular weight High Density Polyethylene copolymer which has a broad molecular weight distribution. The design of the product, molecular architecture and density, gives it a unique combination of easy extrusion and high melt strength with strong physical properties which makes it suitable for producing thin films with excellent strength and rigidity. |
| ICP49007S | SABIC? HDPE ICP49007S is a high density polyethylene typically used for state of the art blow moulding UN certified Intermediate Bulk Containers and Heating Oil Tanks, up to 1000 liters and more. This UV-stabilised and food approved grade combines good processing performance with good stress crack resistance, stiffness and impact performance.This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| ICP4907S | SABIC? HDPE ICP4907S is part of SABIC"s high density polyethylene Industrial Container Product portfolio. SABIC? HDPE ICP4907S is typically used for state of the art blow molding UN certified Intermediate Bulk Containers and Heating Oil Tanks, up to 1000 liters and more. This UV-stabilized and food approved grade combines good processing performance with good stress crack resistance, stiffness and impact performance. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| ICP5506 | SABIC? HDPE ICP5506 is part of SABIC"s high density polyethylene Industrial Container Product portfolio. SABIC? HDPE ICP5506 is a material with a specific molecular weight distribution, typically used for blow molding of light weight and UN certified cans from 2 until 30 liters. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| ICP5602 | SABIC? HDPE ICP5602 is part of SABIC"s high density polyethylene Industrial Container Product portfolio. SABIC? HDPE ICP5602 is typically used for blow molding UN certified Tight Head drums, from 25 up to 220 liters. This food approved grade combines good processing performance with good stress crack resistance, stiffness and impact performance. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| ICP5703 | SABIC? HDPE ICP5703 is part of SABIC"s high density polyethylene Industrial Container Product portfolio. SABIC? HDPE ICP5703 is typically used for blow molding UN certified Open Head drums, from 25 up to 220 liter. This food approved grade combines good processing performance with good stress crack resistance, stiffness and impact performance. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M1053 | SABIC? HDPE M1053 is an easy-to-process, tough grade with good resistance to environmental stress cracking (ESCR) and low notch sensitivity. SABIC? HDPE M1053 is typically used for e.g. caps, closures and pails. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M200056 | M200056 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties, low warp age with good dimensional stability and high gloss. |
| M300054 | M300054 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties, low warpage with good dimensional stability and high gloss. |
| M40053S | M40053S is a UV stabilized High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to provide good balance of stiffness and impact at low temperatures and is also having good weatherability and surface properties. |
| M40060 | M40060 is High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good rigidity, excellent toughness and low warp age. |
| M40060S | SABIC? HDPE M40060S is a UV stabilized, High Density Polyethylene copolymer injection molding grade with a narrow molecular weight distribution. Articles produced from this grade typically show good rigidity, good impact strength, low warpage, stress crack resistance (ESCR) and good gloss. |
| M453SE | SABIC? HDPE M453SE is typically used for the high demanding dustbin market. It is an UV stabilized HDPE copolymer grade. It typically shows a good combination of process ability, consistency and product properties, good stiffness/cold impact-balance, surface quality and weather ability properties. SABIC? HDPE M453SE is typically used for the manufacture of injection molded dustbins (waste containers on wheels and household containers), crates boxes (pallet boxes, pallets, boxes applied at low temperatures) and pails container applications (industrial, shipping). Processing conditions. Typical molding conditions for SABIC? HDPE M453SE are: Melt temperature: 232 - 260 °C (450 - 500 °F); Mold temperature: 20 - 40 °C (70 - 104 °F); Injection pressure: 93 - 103 MPa (13500 - 15000 PSI) This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M80064 | M80064 is a High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good rigidity, toughness and low warpage. |
| M80064S | M80064S is a UV stabilized, High Density Polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required..Typical moulding conditions for SABIC? HDPE M80064S are:This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M864E | SABIC? HDPE M864E is a high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC? HDPE M864E is available with UV stabilizer as SABIC? HDPE M864SE and M864SG. Typical applications. Crates Boxes: SABIC? HDPE M864E is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Caps Closures: SABIC HDPE? M864E is typically used for Juice, Milk and Edible Oil applications. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M864EG | SABIC? HDPE M864EG is a high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC? HDPE M864EG is available with UV stabilizer as SABIC? HDPE M864SE and M864SG. Typical applications: Crates Boxes: SABIC? HDPE M864EG is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Caps Closures: SABIC HDPE? M864EG is typically used for Juice, Milk and Edible Oil applications. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| M864SE | SABIC? HDPE M864SE is an UV stabilized, high density polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required. SABIC? HDPE M864SE is typically used for the manufacture of injection molded cases, crates, trays, industrial pails and other similar items. Processing conditions. Typical molding conditions for SABIC? HDPE M864SE are: Melt temperature: 230 - 275 °C (450 - 525 °F); Mold temperature: 32 - 38 °C (90 - 100 °F); Injection pressure: 69 - 89 MPa (10000 - 13000 PSI) This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| P4808N | P4808 is a natural bimodal high density polyethylene (HDPE) resin, specifically designed for non-pressure pipe extrusion application. It provides good stress crack resistance properties (ESCR). |
| P4808NA | P4808NA is a high density Polyethylene with multimodal distribution of the molecular mass. This is natural color grade suitable for non-pressure pipe applications. It provides good ESCR (environmental stress cracking resistance) |
| P5305N | HDPE P5305N is a multimodal high density polyethylene Natural grade specially developed for non-pressure pipe applications. The material offers high stiffness, toughness and excellent combination of stiffness/ESCR. |
| P5307N | HDPE P5307N is a multimodal high density polyethylene Natural grade specially developed for non-pressure pipe applications. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR. |
| P5510 BLACK | SABIC? HDPE 551010000 (black) is a grade, which has a high density (class MRS 8 - PE 80) and a bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to a keen combination of properties, is particularly suitable for drinking water and waste water piping. It is also used for the manufacture of chemical apparatus and containers. This material meets (inter)national standards for use in drinking water and wastewater piping. |
| P5616N | HDPE P5616N is a multimodal high density polyethylene Natural grade specially developed for f non-pressure pipe applications. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength. |
| P6006 | P6006 is black compound high density (class MRS 10 - PE 100) Polyethylene with bimodal distribution of molecular mass. It is specifically designed for pressure Pipe applications. It provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength. |
| P6006AD | P6006AD is black compound high density polyethylene (classified as PE112) specially designed for pressure pipe applications. It delivers exceptional processing performance. |
| P6006LS | P6006LS is black compound high density (classified as PE112 ) specifically designed for pressure Pipe low sagging (LS) applications. It delivers exceptional low sag performance for large-diameter pipes and pressure pipes with low standerd dimension ratio (SDR). |
| P6006N | P6006N is a grade which has a high density (classified as PE4710) and bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to keen combination of properties. It can be used for telecommunication, corrugated and spiral pipes. |
| P6006NA | P6006NA is a high density Polyethylene (potentially ASTM PE4710 cell class requirements) with multimodal distribution of the molecular mass. This is natural color grade suitable for pipe extrusion with excellent combination of properties. It is also suitable for use in telecommunication ducting, corrugated pipes and spiral pipes. |
| P6006RC | P6006RC is black compound high density (class MRS 10 Mpa) specifically designed for pressure Pipe applications. It offers excellent resistance to slow crack growth propagation in high-pressure pipe applications and can therefore be used with advanced trenchless pipe installation technologies such as re-lining, horizontal directional drilling pipe bursting. |
| PCG3054 | SABIC? HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC? HDPE PCG3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC? HDPE PCG3054 is typically used for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices. Compliance to regulations. SABIC? HDPE PCG3054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). |
| PCG453 | SABIC? HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC? HDPE PCG453 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. This grade has a very high impact resistance, even at low temperatures. Compliance to regulations. SABIC? HDPE PCG453 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). |
| PCG5421 | SABIC? HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC? HDPE PCG5421 is typically used for the blow molding of healthcare packaging (bottles and cans). The product features a good stiffness/ESCR balance combined with good process ability. Compliance to regulations. SABIC? HDPE PCG5421 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). |
| PCG863 | SABIC? HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC? HDPE PCG863 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. It is an easy-to-process, stiff grade. Compliance to regulations. SABIC? HDPE PCG863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). |
| PCGF0863 | SABIC? HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC? HDPE PCGF0863 resin is a high density homopolymer with good barrier properties. The grade offers high stiffness, high temperature resistance and relatively high grease resistance. The resin has a low gel level. SABIC? HDPE PCGF0863 is typically used for flexible packaging, pharmaceuticals and devices and release liners. Film properties have been measured at cast film of 25 μm. Water vapor permeability at 38 °C and 100 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h. Compliance to regulations. SABIC? HDPE PCGF0863 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). |
