东莞市超林塑胶有限公司
PA66 美国杜邦 11C1-40产品信息：
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 密度 | 1.45 g/cc | 0.0524 lb/in3 | DAM; ISO 1183 |
| 填料含量 | 40 % | 40 % | DAM |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 59.0 MPa @Temperature 23.0 °C |
8560 psi @Temperature 73.4 °F |
50%RH; ISO 527 |
| 87.0 MPa @Temperature 23.0 °C |
12600 psi @Temperature 73.4 °F |
DAM; ISO 527 | |
| 伸长率 (断裂) | 8.0 % @Temperature 23.0 °C |
8.0 % @Temperature 73.4 °F |
DAM; ISO 527 |
| 20 % @Temperature 23.0 °C |
20 % @Temperature 73.4 °F |
50%RH; ISO 527 | |
| 拉伸模量 | 2.50 GPa @Temperature 23.0 °C |
363 ksi @Temperature 73.4 °F |
50%RH; ISO 527 |
| 5.80 GPa @Temperature 23.0 °C |
841 ksi @Temperature 73.4 °F |
DAM; ISO 527 | |
| 悬壁梁缺口冲击强度 | 5.00 kJ/m2 @Temperature 23.0 °C |
2.38 ft-lb/in2 @Temperature 73.4 °F |
DAM; ISO 180/1A |
| 8.00 kJ/m2 @Temperature 23.0 °C |
3.81 ft-lb/in2 @Temperature 73.4 °F |
50%RH; ISO 180/1A | |
| 简支梁无缺口冲击强度 | 11.5 J/cm2 @Temperature 23.0 °C |
54.7 ft-lb/in2 @Temperature 73.4 °F |
DAM; ISO 179/1eU |
| NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
50%RH; ISO 179/1eU | |
| 简支梁缺口冲击强度 | 0.550 J/cm2 @Temperature 23.0 °C |
2.62 ft-lb/in2 @Temperature 73.4 °F |
DAM; ISO 179/1eA |
| 0.800 J/cm2 @Temperature 23.0 °C |
3.81 ft-lb/in2 @Temperature 73.4 °F |
50%RH; ISO 179/1eA |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 熔融温度 | 256 °C | 493 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| 载荷下热变形温度(1.8 MPa) | 95.0 °C | 203 °F | DAM; ISO 75-1/-2 |
| UL RTI | 65.0 °C @Thickness 0.810 mm |
149 °F @Thickness 0.0319 in |
DAM; UL 746B |
| 65.0 °C @Thickness 3.00 mm |
149 °F @Thickness 0.118 in |
DAM; UL 746B | |
| 65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
DAM; UL 746B | |
| UL RTI，机械冲击 | 65.0 °C @Thickness 0.810 mm |
149 °F @Thickness 0.0319 in |
DAM; UL 746B |
| 65.0 °C @Thickness 3.00 mm |
149 °F @Thickness 0.118 in |
DAM; UL 746B | |
| 65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
DAM; UL 746B | |
| UL RTI，机械无冲击 | 65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
DAM; UL 746B |
| 65.0 °C @Thickness 3.00 mm |
149 °F @Thickness 0.118 in |
DAM; UL 746B | |
| 65.0 °C @Thickness 0.810 mm |
149 °F @Thickness 0.0319 in |
DAM; UL 746B | |
| 可燃性(UL94) | HB @Thickness 0.810 mm |
HB @Thickness 0.0319 in |
DAM; IEC 60695-11-10 |
| HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
DAM; IEC 60695-11-10 | |
| HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | |
| HB @Thickness 0.810 mm |
HB @Thickness 0.0319 in |
DAM; UL94 | |
| HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; UL94 | |
| HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
DAM; UL94 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工（熔体）温度 | 295 °C | 563 °F | DAM; Optimum |
| 285 - 305 °C | 545 - 581 °F | DAM | |
| 模具温度 | 70.0 - 120 °C | 158 - 248 °F | DAM |
| 100 °C | 212 °F | DAM; optimum | |
| 干燥温度 | 80.0 °C | 176 °F | DAM |
| 干燥时间 | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM |
| 水分含量 | <= 0.20 % | <= 0.20 % | DAM |
| 材料描述 | 测试方法 | |
|---|---|---|
| 外观 | Black Color | DAM |
| Drying Recommended | Yes, if moisture content of resin exceeds recommended level | DAM |
| Filler | Mineral filler | DAM |
| 形式 | Pellets | DAM |
| Generic | Nylon 66 | DAM |
| Material Status | Current | DAM |
| 部件标识代码 | >PA66-IMD40< | ISO 11469; DAM |
| Polymer Family | Polyamide | DAM |
| Polymer Type | PA66 | DAM |
| 加工方法 | Injection Molding | DAM |
| 产品分类 | Low Warp Resins | DAM |
| Mineral Reinforced Resins | DAM | |
| 树脂识别 | PA66-IMD40 | ISO 1043; DAM |
我公司可以提供原料认证报告；ROHS报告，UL认证、FDA认证、材质证明、物质安全资料表（MSDS)物性、报价、UL报告、RoSH标准、ISO，ASTM物性资料，SGS检测报告等。
本公司货源充足，价格合理，原厂原包，欢迎新老客户来电订购！
