东莞市常平嘉美塑胶原料贸易行
TPE VERSAFLEX CL2250
| General | |
Material Status |
|
Availability |
Africa Middle EastAsia PacificLatin AmericaNorth America |
Features |
Good ColorabilityGood MoldabilityGood ProcessabilityGood Processing StabilityHigh Clarity |
Uses |
Medical/Healthcare ApplicationsOvermoldingPacifiersPersonal CareTransparent or Translucent Parts |
Agency Ratings |
12 |
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
| Physical | Nominal Value |
Unit |
Test Method |
Density / Specific Gravity |
ASTM D792 | ||
Melt Mass-Flow Rate (MFR)(190°C/2.16 kg) |
g/10 min |
ASTM D1238 | |
Molding Shrinkage - Flow |
in/in |
ASTM D955 | |
| Mechanical | Nominal Value |
Unit |
Test Method |
Flexural Modulus |
psi |
ASTM D790 | |
| Elastomers | Nominal Value |
Unit |
Test Method |
Tensile Stress4,5 |
ASTM D412 | ||
100% Strain, 73°F |
psi |
||
300% Strain, 73°F |
psi |
||
Tensile Strength4,5(Break, 73°F) |
psi |
ASTM D412 | |
Tensile Elongation4,5(Break, 73°F) |
% |
ASTM D412 | |
Tear Strength |
lbf/in |
ASTM D624 | |
Compression Set(73°F, 22 hr) |
% |
ASTM D395B |
