EL-Lene? H455JA
Technical Datasheet | Supplied by SCG Chemicals
EL-Lene? H455JA by SCG Chemicals is a recyclable high density polyethylene (HDPE) grade. Exhibits good processability, good mechanical properties and excellent organoleptic properties. EL-Lene? H455JA is insoluble in water and suitable for processing by injection molding and continuous compression molding. Recommended for caps and closures of the beverages like tea, juice, still and mineral water. Complies with U.S FDA 21 CFR 177.1520, Olefin Polymers (c) 2.1 and Commission Regulation (EU) no. 10/2011.
General | |
Material Status |
|
Availability |
Asia PacificNorth America |
Features |
Food Contact AcceptableGood Organoleptic PropertiesGood ProcessabilityHigh DensityRecyclable Material |
Uses |
CapsClosures |
Agency Ratings |
|
Forms |
|
Processing Method |
Compression MoldingInjection Molding |
Physical | Nominal Value |
Unit |
Test Method |
Density |
g/cm3 |
ASTM D1505 | |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) |
g/10 min |
ASTM D1238 | |
Molding Shrinkage |
TPE | ||
Flow |
in/in |
||
Across Flow |
in/in |
||
Environmental Stress-Cracking Resistance (ESCR) (122°F, 10% Igepal, Compression Molded, F50) |
hr |
ASTM D1693B | |
Mechanical | Nominal Value |
Unit |
Test Method |
Tensile Strength 2 |
ASTM D638 | ||
Yield |
psi |
||
Break |
psi |
||
Tensile Elongation 2 (Break) |
% |
ASTM D638 | |
Flexural Modulus |
psi |
ASTM D790 |
HDPE EL-LENE H455JA 可提供COA、COC,ROHS.MSDS.UL黄卡等等资料,价格最优,质量保证!
HDPE特性:
高密度聚乙烯具有良好的耐热性和耐寒性,化学稳定性好,还具有较高的刚性和韧性,机械强度好。介电性能,耐环境应力开裂性亦较好。硬度、拉伸强度和蠕变性优于低密度聚乙烯;耐磨性、电绝缘性、韧性及耐寒性均较好,但与低密度绝缘性比较略差些;化学稳定性好,在室温条件下,不溶于任何有机溶剂,耐酸、碱和各种盐类的腐蚀;薄膜对水蒸气和空气的渗透性小、吸水性低;耐老化性能差,耐环境开裂性不如低密度聚乙烯,特别是热氧化作用会使其性能下降,所以,树脂需加入抗氧剂和紫外线吸收剂等来提高改善这方面的不足。高密度聚乙烯薄膜在受力情况下的热变形温度较低,这一点应用时要注意。
应用:用于挤出包装薄膜,绳索,编织袋,渔网,水管;注塑低档日用品及外壳,非承载荷构件,胶箱,周转箱;挤出吹塑容器,中空制品,瓶子。