VITAMIDE® AP76
Technical Datasheet | Supplied by A. Schulman (LyondellBasell)
VITAMIDE® AP76 is a heat and UV stabilized polyamide 66 grade by A Schulman, reinforced with 15% glass bead and 15% glass fiber. Exhibits good surface appearance, weld strength and very good performance/cost ratio properties. VITAMIDE® AP76 is suitable for processing by injection molding. Used for water pump connectors. Complies with RoHS, WEEE and UL 94 HB flame rating.
PA66 VITAMIDE AP76
| 流变性能(Rheological properties) |
值(Value) |
单位(Unit) |
测试标准(Test Standard) |
| ISO数据 |
|
|
|
| 成型收缩(Molding shrinkage) (parallel) |
0.3 |
% |
ISO 294-4, 2577 |
| 机械性能(机械性能(Mechanical properties)) |
值(Value) |
单位(Unit) |
测试标准(Test Standard) |
| ISO数据 |
|
|
|
| 抗拉强度(Tensile Strength) |
160 |
MPa |
ISO 527-1/-2 |
| 破坏时应变(Strain at break) |
3 |
% |
ISO 527-1/-2 |
| 弯曲弹性模量(Flexural modulus) (23°C) |
7200 |
MPa |
ISO 178 |
| 悬臂梁式冲击切口 (23°C) |
7 |
kJ/m2 |
ISO 180/1A |
| 热性能(热性能(Thermal properties)) |
值(Value) |
单位(Unit) |
测试标准(Test Standard) |
| ISO数据 |
|
|
|
| 熔化温度(熔化温度(Melting temperature)) (10°C/min) |
260 |
°C |
ISO 11357-1/-3 |
| 温度负荷变形(Temp. of deflection under load) (1.80 MPa) |
175 |
°C |
ISO 75-1/-2 |
| 温度负荷变形(Temp. of deflection under load) (0.45 MPa) |
220 |
°C |
ISO 75-1/-2 |
| 燃烧性厚度(Burning behav. at thickness h) |
HB |
class |
IEC 60695-11-10 |
| 电气性能(Electrical properties) |
值(Value) |
单位(Unit) |
测试标准(Test Standard) |
| ISO数据 |
|
|
|
| 表面电阻率(Surface resistivity) |
1E14 |
Ohm |
IEC 60093 |
| 电气强度(Electric strength) |
34 |
kV/mm |
IEC 60243-1 |
| 相比漏电起痕指数(Comparative tracking index) |
450 |
- |
IEC 60112 |
| 其他属性(Other properties) |
值(Value) |
单位(Unit) |
测试标准(Test Standard) |
| ISO数据 |
|
|
|
| 密度(Density) |
1370 |
kg/m3 |
ISO 1183 |
PA66 VITAMIDE AP76 可提供COA、COC,ROHS.MSDS.UL黄卡等等资料，价格最优，质量保证！
