东莞市常平山鑫塑胶原料经营部
我公司长期供应PC如下型号
沙特沙伯基础
LEXAN FL1000 PC
LEXAN FL2000 PC
LEXAN FL2003 PC
LEXAN FL3000 PC
LEXAN FL403 PC
LEXAN FL405 PC
LEXAN FL410 PC
LEXAN FL900 PC
LEXAN FL900S PC
LEXAN FL903 PC
LEXAN FL910 PC
LEXAN FL913 PC
LEXAN FL920 PC
LEXAN FL930 PC
LEXAN FL933 PC
LEXAN FST9705 PC
LEXAN FXD101R PC
LEXAN FXD103 PC
LEXAN FXD103R PC
LEXAN FXD104R PC
SABIC Innovative Plastics Lexan® FL3000 PC 物性表
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | 1.07 g/cc | 1.07 g/cc | foam molded; ASTM D 792 |
| 1.19 g/cc | 1.19 g/cc | ASTM D 792 | |
| 线性成型收缩率,Flow | 0.0040 - 0.0080 cm/cm @Thickness 6.40 mm |
0.0040 - 0.0080 in/in @Thickness 0.252 in |
SABIC Method |
| 熔体流动速率 | 9.5 g/10 min @Load 1.20 kg, Temperature 300 °C |
9.5 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D 1238 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 40.0 MPa @Thickness 6.35 mm |
5800 psi @Thickness 0.250 in |
ASTM D 638 |
| 伸长率 (断裂) | 3.2 % @Thickness 6.35 mm |
3.2 % @Thickness 0.250 in |
ASTM D 638 |
| 拉伸模量 | 2.81 GPa @Thickness 6.40 mm |
408 ksi @Thickness 0.252 in |
ASTM D 638 |
| 弯曲强度 | 72.0 MPa @Thickness 6.40 mm |
10400 psi @Thickness 0.252 in |
ASTM D 790 |
| 弯曲模量 | 1.89 GPa @Thickness 6.40 mm |
274 ksi @Thickness 0.252 in |
ASTM D 790 |
| 悬壁梁无缺口冲击强度 | 9.07 J/cm @Thickness 6.40 mm, Temperature 23.0 °C |
17.0 ft-lb/in @Thickness 0.252 in, Temperature 73.4 °F |
ASTM D 4812 |
| 冲击试验 | 89.0 J @Temperature 23.0 °C |
65.6 ft-lb @Temperature 73.4 °F |
Instrumented Impact Total Energy; ASTM D 3763 |
| 94.0 J @Temperature -20.0 °C |
69.3 ft-lb @Temperature -4.00 °F |
Instrumented Impact Total Energy; ASTM D 3763 | |
| 94.0 J @Temperature -40.0 °C |
69.3 ft-lb @Temperature -40.0 °F |
Instrumented Impact Total Energy; ASTM D 3763 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 载荷下热变形温度(0.46 MPa) | 131 °C @Thickness 6.40 mm |
268 °F @Thickness 0.252 in |
unannealed; ASTM D 648 |
| 载荷下热变形温度(1.8 MPa) | 120 °C @Thickness 6.40 mm |
248 °F @Thickness 0.252 in |
unannealed; ASTM D 648 |
| UL RTI | 50.0 °C | 122 °F | UL 746B |
| UL RTI，机械冲击 | 50.0 °C | 122 °F | UL 746B |
| UL RTI，机械无冲击 | 50.0 °C | 122 °F | UL 746B |
| 可燃性(UL94) | V-0 @Thickness 2.99 mm |
V-0 @Thickness 0.118 in |
UL 94 |
| 5VA @Thickness 6.09 mm |
5VA @Thickness 0.240 in |
UL 94 |
| 材料描述 | 测试方法 | |
|---|---|---|
| FOAM - Flame Class Minimum Density, g/cm^3 | 1.07 | - |
| FOAM - IMPACT 6.4 mm Wt Reduction, % | 10 | - |
| FOAM - MECHANICAL 6.4 mm Wt Reduction, % | 10 | - |
| FOAM - PHYSICAL 6.4mm Wt Reduction, % | 10 | - |
| FOAM - THERMAL 6.4mm Wt Reduction, % | 10 | - |
| UV-light, water exposure/immersion | F1 | UL 746C |
