塑料阶梯环Plastic Cascade Mini Ring
塑料阶梯环的材质有PP, PE, PP, PVC, CPVC, PVDF等各类材质,是由英国的MTL公司发明,所以又称之为CMR。 塑料阶梯环填料的侧端增加了翻边,不但能够增加填料环的机械强度,而且由于塑料阶梯环填料曾经毁坏了填料构造的对称性,因此增加了填料投放时的定向几率。又由于翻边的影响,使得阶梯环填料在堆积时填料环隙之间的接触由此线性接触为主变为以点接触为主。 所以塑料阶梯环填料不但增加了填料颗粒之间的空隙,减少了气体穿过填料层的阻力,而且这些接触点还可以为液体沿填料表面流动的汇聚分散点,从而促进了液膜的表面更新,有利于填料传质效率的提高。...
Product Name 产品名称 |
塑料阶梯环Plastic Cascade Mini Ring |
|||||
Material 材质 |
PP,PE,PVC,CPVC,PVDF,etc |
|||||
Life Span 使用寿命 |
>3 years |
|||||
Size尺寸 |
Surface Area m2/m3 比表面积 |
Void Volume % 空隙率 |
Packing Number pieces/ m3 堆积个数 |
Packing Density Kg/m3 堆积重量 |
DryPacking Factor m-1 干填料因子 |
|
Inch |
mm |
|||||
1/2’’ |
16*8.9*1 |
370 |
85 |
299136 |
135.6 |
602.6 |
1” |
25*12.5*1.2 |
228 |
90 |
81500 |
65 |
312.8 |
1-1/2” |
38*19*1.2 |
132.5 |
91 |
27200 |
54 |
175.8 |
2” |
50*25*1.5 |
114.2 |
92.7 |
10740 |
43 |
143.1 |
3” |
76*37*2.6 |
90 |
92.9 |
3420 |
44 |
112.3 |
Feature 性能 |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. 空隙率大、压降低、传质单元高度低、 泛点高、 气液接触充分 、 比重小、 传质效率高 |
|||||
Advantage 优点 |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability.特殊的结构使其流通量大、压降低、机械强度好。 |
|||||
Application 应用领域 |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of280°.塑料散堆填料的最大使用温度为280摄氏度,广泛用于石油,化工,氯碱,煤气,环保等行业的填料塔里。 |