商品 详情
EASTAR 耐化学性PCTA GN046

¥ 17

  • ≥ 25 起订量
  • 10000公斤 总供应
  • 广东 东莞 所在地
东莞市恒磊塑胶有限公司
产品详情

PCTA EASTAR.jpg

PCTA EASTAR GN046 产品说明:

Eastar? Copolyester GN046 is a very high melt strength copolyester targeted for extrusion blow molding applications. Blow molding of large parts (up to several pounds) are possible with this material. This product is certified to ANSI/NSF Standard 51.

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED?.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED? Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman? Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

This product has been CRADLE TO CRADLE CERTIFIED(cm)
The CRADLE TO CRADLE CERTIFIED(cm) Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE? framework moves beyond the traditional goal of reducing the negative impacts of commerce (‘eco-efficiency"), to a new paradigm of increasing its positive impacts (‘eco-effectiveness"). At its core, Cradle to Cradle design perceives the safe and productive processes of nature"s ‘biological metabolism" as a model for developing a ‘technical metabolism" flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit http://www.mbdc.com.

物理性能 额定值 单位制 测试方法
比重 1.27 g/cm3 ASTM D792
收缩率 - 流动 (3.20 mm) 0.20 到 0.50 % ASTM D955
硬度 额定值 单位制 测试方法
洛氏硬度 (R 级, 23°C) 108
ASTM D785
机械性能 额定值 单位制 测试方法
抗张强度

ASTM D638
    屈服, 23°C 50.0 MPa ASTM D638
    断裂, 23°C 28.0 MPa ASTM D638
伸长率

ASTM D638
    屈服, 23°C 4.0 % ASTM D638
    断裂, 23°C 110 % ASTM D638
弯曲模量 (23°C) 2100 MPa ASTM D790
弯曲强度 (23°C) 68.0 MPa ASTM D790
冲击性能 额定值 单位制 测试方法
悬壁梁缺口冲击强度

ASTM D256
    -40°C 53 J/m ASTM D256
    23°C 94 J/m ASTM D256
无缺口悬臂梁冲击

ASTM D4218
    -40°C 无断裂
ASTM D4218
    23°C 无断裂
ASTM D4218
装有测量仪表的落镖冲击

ASTM D3763
    -40°C, Energy at Peak Load 35.0 J ASTM D3763
    23°C, Energy at Peak Load 36.0 J ASTM D3763

PCTA EASTAR GN046 可提供COA、COC,ROHS.MSDS.UL黄卡等等资料,价格最优,质量保证!


首页 橡塑 / 工程塑料 / PCTA
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商,但该供应商24 小时未响应情况下,仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验