TECHNOMELT PA 6208

TECHNOMELT汉高PA6208聚酰胺PA热熔胶

PRODUCT DESCRIPTION

TECHNOMELT PA 6208 (e) provides the following product

characteristics:

Technology : Polyamide

Appearance : Amber

Components : One-component

Application : Molding compound thermoplastic

Cure : Physical setting

Typical Applications : Encapsulation

Flammability Rating : UL 94 V0

Operating TemperatureRange : -40 to 100℃ (Depends on application, without mechanical stress)

NOURDE TECHNOMELT PA 6208 (e) thermoplastic, hot melt adhesive is designed for molding compound applications.

This material adheres well to a variety of substrates including metals and ABS

nourde low pressure molding material solutions

Softening Point, ℃ : 155℃

Melting Viscosity @ 210oC, mPa·s (cP) : 3,400

Temperature creep resistance, ℃ : 130℃

Elongation, % : 500

Hardness , Shore A : 82

Low Temperature Flexibility, ℃: -40

Application:

Application Temperature: 180 to 230℃

Application System: Hot Melt Application System

When bonding to a substrate with high thermal conductivity the use of

a specific application temperature is required for good wetting. Do not

heat the product above the specified application temperature range.

When the product is not in use do not apply heat, this will degrade the

quality of the product and in extreme cases cause carbonization.

TECHNOMELT PA 6208 (e) may absorb moisture from the air. This

will not be apparent in the solid form, but may cause bubbles on

heating and could affect the bond quality. It is important, therefore, that

containers are kept closed and sealed when not in use.

nourde polyamide low pressure molding

Cleaning:

Carbonized and set (non thermoplastic) material must be removed

mechanically. Removal of the thermoplastic material from the hot

apparatus can be achieved with solvent free cleaning system, such as

Technomelt 0062 (see separate technical information).

Storage:

Store in a cool, dry location, with the container tightly closed. When

not in used, this product will have a shelf life of at least 24 months.

---

如需TDS（Technical Data Sheets）, SDS（Safety Data Sheets）, RoHS（RoHS Data Sheets）…等资料或申请样品，请联系我们。

质量属性和版权声明：

1. 图片或视频，均来自产品实物拍摄；

2. 产品数据参数TDS，全部来自原厂官方文件。未作任何修改；

3. 工艺应用产品的图片、文字、视频，可能会牵涉到商业保密，如有发现请及时联系as@nourde.com协商处理；

4. 工艺技术经验，仅用于交流和分享；

5. 所有图文、视频，未经允许，禁止用于任何商业用途；

---