艾博（国际）塑胶进出口有限公司
ABS TERLURAN GP-22
Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector. Excellent colorability, Medium flow, Good impact resistance, Good heat distortion resistance, High quality surface finish and gloss, Great mechanical strength and rigidity.
Applications: Injection molding, Appliance housings, Household and sanitary appliances, Toys, Automotive components, Consumer products.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in3 | ISO 1183 |
| Moisture Absorption at Equilibrium | 0.22 % @Temperature 23.0 °C |
0.22 % @Temperature 73.4 °F |
50% RH; ISO 62 |
| Water Absorption at Saturation | 1.0 % @Temperature 23.0 °C |
1.0 % @Temperature 73.4 °F |
ISO 62 |
| Linear Mold Shrinkage | 0.00400 - 0.00700 cm/cm | 0.00400 - 0.00700 in/in | ISO 294-4 |
| Melt Flow | 19 g/10 min @Load 10.0 kg, Temperature 220 °C |
19 g/10 min @Load 22.0 lb, Temperature 428 °F |
Volumetric; cm3/10 min; ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 103 | 103 | ASTM Test |
| Ball Indentation Hardness | 97.0 MPa | 14100 psi | ISO 2039-1 |
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | ISO 527 |
| Elongation at Break | 10 % | 10 % | Nominal; ISO 527 |
| Elongation at Yield | 2.6 % | 2.6 % | ISO 527 |
| Tensile Modulus | 2.30 GPa | 334 ksi | ISO 527 |
| Flexural Strength | 65.0 MPa | 9430 psi | ISO 178 |
| Izod Impact, Notched | 0.600 J/cm @Temperature -30.0 °C |
1.12 ft-lb/in @Temperature -22.0 °F |
ASTM Test |
| 1.00 J/cm @Temperature -18.0 °C |
1.87 ft-lb/in @Temperature -0.400 °F |
ASTM Test | |
| 3.00 J/cm @Thickness 3.17 mm |
5.62 ft-lb/in @Thickness 0.125 in |
ASTM Test | |
| Izod Impact, Notched (ISO) | 8.00 kJ/m2 @Temperature -30.0 °C |
3.81 ft-lb/in2 @Temperature -22.0 °F |
ISO 180/A |
| 26.0 kJ/m2 @Temperature 23.0 °C |
12.4 ft-lb/in2 @Temperature 73.4 °F |
ISO 180/A | |
| Charpy Impact Unnotched | 10.0 J/cm2 @Temperature -30.0 °C |
47.6 ft-lb/in2 @Temperature -22.0 °F |
ISO 179/1eU |
| 18.0 J/cm2 @Temperature 23.0 °C |
85.7 ft-lb/in2 @Temperature 73.4 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 0.800 J/cm2 @Temperature -30.0 °C |
3.81 ft-lb/in2 @Temperature -22.0 °F |
ISO 179/1eA |
| 2.20 J/cm2 @Temperature 23.0 °C |
10.5 ft-lb/in2 @Temperature 73.4 °F |
ISO 179/1eA | |
