美国Quest Qi2 LOTIS QC-X 非接触式螺纹测量系统 非接触式激光扫描 螺纹测量工具

客服热线： 400-840-1510

https://www.bihec.com/quest

Traditional thread measurement requires multiple devices and expert interpretation that frequently stops production altogether. LOTIS® QC-X thread-profiling system uses rapid, non-contact laser scanning contained in one portable device. Necessitating no special operator skills, LOTIS® QC-X optimizes thread cutting process control and increases the frequency of First Article Inspection (FAI) in a self-contained, user-friendly system. In a 30 second scan cycle, the revolutionary thread measurement system obtains nearly instantaneous data on thread pitch, thread height, flank angles, bore taper, and corner radii with an accuracy of +/- 0.00023”. The application of this advanced laser measurement system reduces inspection cost, time, and error in interpretation for improved quality control.

传统的线程测量需要多种设备和专家经验, 从而经常因为问题影响生产。LOTIS® QC-X 螺纹分析系统使用快速, 非接触式激光扫描，并且是一个便携设备。无需特殊操作技能, LOTIS® QC-X 优化线切割过程控制, 并增加了一个独立的First Article Inspection (FAI) 频率, 系统非常简单好用。在30秒扫描周期中, 螺纹测量系统在螺纹螺距、螺纹高度、侧面角、内径锥度和角半径上获得瞬时数据, 其精确度为 +/-0.00023''。该先进的激光测量系统的应用, 降低了检测成本、时间和解释误差, 提高了质量控制的效率。

Features and Benefits of Use

• Profile threads in a 30 second scan cycle

• Gives QA/QC managers improved quality control of threading operations

• Increase frequency of article inspection

• Optimize thread cutting process control

•  Self-contained system – scan to reports – no additional equipment required

• Easy to learn and easier to use

• No special operator skills required

LOTIS®QC-X Qi2 quest 侧面角度 便携式 孔锥度 激光测量系统 螺纹测量仪 螺纹测量工具 螺纹高度 螺距 角半径 非接触式激光扫描 非接触式螺纹测量系统