50L真空搅拌机、智慧型50L真空搅拌机、智能型真空搅拌机

1、基本技术参数：
1-1品名和规格型号
A、行星搅拌机；B、规格型号：BLDJB-50L。
1-2基本结构
A、电动锅体升降式；    B、双搅拌+刮壁+测温
1-3桶体(搅拌桶)
A、规格：Dia.450mm×380mm；B、设计容积：60L；C、桶壁为双层设计，带冷却水循环冷却
A、内胆材质：SUS304；
B、内胆壁车削加工后镜面抛光，保证良好的圆度；
C、搅拌桶上法兰平面与上桶体通过密封圈进行密封；
D、桶体安装四个万象滚轮。
1-4上桶体（釜盖）
A、材料：SUS304。
B、一个Φ83粉体/液体加料斗，可迅速开关；射灯1只；带2个小视窗（一个射灯口和一个观

察孔），真空压力表一个，及其他必要的接管（真空/放空/备用）。
1-5混合原理
安装于行星箱体上的两只搅拌桨自转，又作公转；同时结合双搅拌浆的低间隙设计，无死角

，低速搅拌桨强烈的捏合干涉运动和和上下/左右循环运动，保证物料充分搅拌和混合。
1-6-1公转/搅拌电机及
变频器、减速机
A、数量：一台；B、电机功率：5.5Kw/4P；C、带与电机匹配的5.5KW变频调速器。E、配套蜗

轮蜗杆减速机RV075,减速比约I=40.26,使用系数fa=1.55。
1-6-2a行星公转速度
速度：0~37 rpm，可调。
1-6-2b刮壁刀
数量：1组；刮壁材质：SUS304和Teflon；与行星公转速度一致。-------基于设计定
1-6-3间隙参考值
(非强制性)
A、搅拌浆与搅拌桨公差：8±2.5 mm；
B、搅拌浆与底部公差：2～4 mm；
C、搅拌浆与桶壁公差：5±1.5 mm；
1-7-1搅拌轴/搅拌浆速度
速度：0~85转可调。
1-7-2搅拌浆
A、材质：SUS304；B、数量：两个（组）。
1-7-3搅拌浆形式选择
螺旋麻花式或框式。
1-8升降
A、 电动升降：升降电机功率0.37KW；配定位装置；定位安全可靠。
B、 升降高度：≤520。
1-9真空系统
A、搅拌分散过程可在真空状态下进行；真空度：≤-0.09Mpa。
B、真空泵2A-30，0.37kw/4P电机。
C、带真空缓冲罐和开关。
D-1、动密封：采用机械密封；D-2、静密封：采用O形密封圈。
E、保压24小时，和浆或保压状态下不向和浆桶内渗漏油。
1-10定位系统
A、带定位调节装置和锁紧装置，可准确定位搅拌桶和上桶体，并防止旋转。
B、上桶体下法兰的定位止口与搅拌桶配合，保证搅拌桶位置合理，定位准确无误。
1-11配电柜
设备运行中的真空装置，变频调速，射灯，升降，运转急停等功能显示及操作均在配电柜上

进行。
备注：搅拌具有定时功能。
1-12主机总功率：7KW
工作电压：三相380V
1-13外形尺寸：长1200×宽800×高1800
重量：约550KG
2、说明：
2-1密封材料
A、静密封：采用硅橡胶/氟橡胶/丁晴橡胶“O”或“梯形”密封圈，依工况而定。
B、动密封：SiC-S+氟橡胶。
2-2轴承
中间传动轴采用日本NSK牌。
2-3技术文件
供方提供行星分散真空搅拌机技术文件和有关机件的技术说明书。
50L动力混合机配置
一、概述：
行星动力混合搅拌机，此设备集行星机、强力分散机功能于一体，采用独物的搅拌机构,分散

轴、搅拌浆各自作公转又作自转的行星运动，其速度可变频调速，使物料作复杂的运动，受

到强力的剪切、捏合和分散，釜内筒设自动刮壁和刮底装置，将粘附在釜壁上的物料刮下，

实现无死点、高效混合，是化工、食品、能源、粘胶、电子电器、氟硅、医药、化妆品、日

化等行业生产的理想设备，本机由底座、横梁、立柱、釜盖、釜体、传动、电控系统组成。

二、设备设计参数
1 真空度、-0.098Mpa
2 结构形式 悬臂式
3、转 速r/min  低速：公转0~50/min,自转0~85min，.
4、低速轴  螺旋式，无死角区设计
5 锅体定位  机械硬定位  釜盖升盖高度 400mm
6  锅体锁紧  自动机械锁紧
7 电源  AC:3*380V、50HZ

50L vacuum mixer, intelligent 50L vacuum mixer, intelligent vacuum mixer
1. Basic technical parameters:
1-1 name and specification model
A, planetary mixer, B, specifications: BLDJB-50L.
1-2 basic structure
A, electric cooker lifting type; B, double stirring + scraping wall + temperature measurement
1-3 barrel body (mixing barrel)
A, specification: Dia.450mm * 380mm; B; design volume: 60L; C; barrel wall for double deck design; with cooling water circulation cooling
A, liner material: SUS304;
B, inner wall turning mirror polishing, ensure good roundness;
C, the flange surface of the mixing barrel and the upper barrel body are sealed by the sealing ring;
D, barrel installation of four Vientiane roller.
1-4 upper barrel (kettle cover)
A, materials: SUS304.
B, a 83 powder / liquid feeding bucket, can be switched off quickly; 1 spotlights; 2 small windows (one spotlight and one view)
Inspection) a vacuum gauge, one, and other necessary connections (vacuum / blow off / backup).
1-5 mixing principle
The two stirring blades installed on the planet box rotate and turn revolution; simultaneously, there is no dead angle in the design of the low clearance of the double stirring slurry
The low speed agitator strongly moves the interference motion and the up / down / left and right cycle movement, so as to ensure the material to be fully stirred and mixed.
1-6-1 revolution / mixing motor and
Frequency converter, reducer
A, quantity: one, B, motor power: 5.5Kw/4P, C, 5.5KW frequency converter with motor matching. E and companion snail
Worm gear reducer RV075, deceleration ratio of about I=40.26, the use factor fa=1.55.
1-6-2a planetary revolution speed
Speed: 0~37 rpm, adjustable.
1-6-2b wall scraper
Quantity: 1 groups; scraping wall material: SUS304 and Teflon; consistent with the speed of planetary revolution. Design Based
1-6-3 gap reference value
(non mandatory)
A, mixing and mixing paddle tolerances: 8 + 2.5 mm;
B, mixing and bottom tolerances: 2~4 mm;
C, mixing slurry and barrel wall tolerance: 5 + 1.5 mm;
1-7-1 mixing shaft / mixing speed
Speed: 0~85, adjustable.
1-7-2 stirred pulp
A, material: SUS304, B, quantity: two (group).
Selection of 1-7-3 mixing slurry
Spiral twist or frame type.
1-8 lifting
A, electric lifting: lifting motor power 0.37KW; equipped with positioning device; safe and reliable positioning.
B, lifting height: less than 520.
1-9 vacuum system
A, stirring and dispersing process can be carried out in a vacuum; vacuum: less than -0.09Mpa.
B, vacuum pump, 2A-30, 0.37kw/4P motor.
C, with vacuum buffer tank and switch.
D-1, dynamic seal: mechanical seal, D-2, static seal: O shape sealing ring.
E, pressure for 24 hours, and under the condition of pressure or pulp and pulp barrels to spill endosmotic.
1-10 positioning system
The A and the positioning adjusting device and the locking device can accurately fix the mixing barrel and the upper barrel body and prevent rotation.
The positioning stopper of the lower flange of the upper barrel of the B matches with the mixing barrel accurately to ensure the reasonable position of the mixing barrel and the accurate positioning.
1-11 power distribution cabinet
The vacuum device, frequency control, spot light, lifting, running stop and other functions are displayed and operated on the power distribution cabinet
Conduct。
Note: mixing with timing function.
1-12 total power of host: 7KW
Working voltage: three-phase 380V
1-13 dimensions: 1200 x 800 * 1800
Weight: approx. 550KG
2, description:
2-1 sealing material
A, static sealing: silicone rubber / fluorine rubber / NBR rubber "O" or "trapezoidal" sealing ring, depending on the working conditions.
B, dynamic seal: SiC-S+ fluorine rubber.
2-2 bearings
The middle drive shaft adopts the Japanese NSK brand.
2-3 technical documents
Supplier provides planetary dispersion vacuum mixer technical documentation and technical instructions for relevant parts.
50L power mixer configuration
I. overview:
Planetary power mixing machine, which combines planetary machines and powerful dispersing machines, is equipped with a single object stirring mechanism
The shaft and the mixing slurry respectively rotate and rotate as the planetary movement, and the speed of the stirring slurry can be controlled by frequency conversion to make the material move in a complex way
To strong shearing, kneading and dispersing, the kettle is equipped with an automatic scraping and scraping device to scrape the material adhered to the wall of the kettle,
Realize no dead center, efficient mixing, chemical, food, energy, viscose, electronic appliances, fluorine silicon, medicine, cosmetics, day
The machine is composed of a base, a crossbeam, an upright column, a kettle cover, a kettle body, a transmission and an electric control system.
Two, equipment design parameters
1 vacuum degree, -0.098Mpa
2 structural form cantilever
3, speed r/min low speed: Revolution 0~50/min, rotation 0~85min,
4 、 low speed screw type, no dead zone design
The 5 pot body positioning mechanical positioning kettle Gaishenggai height 400mm
6, pot body locking, automatic mechanical locking
7 power AC:3*380V, 50HZ