Tulsion^® CH-32

食品级专用去除氟化物 

ISO-9001/ISO-14001/OHSAS-18000  

饮用水氟化物选择性吸附树脂实例

1.日本Miura 及 Jun’s Coperation 公司（家庭饮用水）

水量： 40m3/h          

氟含量 42ppm           

树脂型号：CH-32

出水氟含量：＜0.5ppm 

树脂用量：3000L  

2.日本穂高（瓶装天然水）

水量： 10m3/h          

氟含量 10ppm           

树脂型号：CH-32

出水氟含量：＜0.5ppm  

树脂用量：800L 

3.新加坡BECHEM TECHNOLOGIES SDN. BHD

水量： 30m3/h          

氟含量 26ppm           

树脂型号：CH-87

出水氟含量：＜0.5ppm  

树脂用量：2000L 

 

Special Strong Base Anion Exchange Resin for Fluoride removal

Tulsion^® CH-32 is a special strong base anion exchange resin based on polystyrene matrix , specially designed
for Fluoride removal applications where “Non Alum” based regenerant is required.

Tulsion^® CH-32 has excellent physical characteristics due to its crack-free nature

Tulsion^® CH-32 is suited for use in a wide range of pH and temperature conditions. TULSION® CH-32 is cracks free
and hence it exhibits very high bead strength. TULSION® CH-32 is supplied in chloride form hence can be regenerated
with “Non Alum” based regenrant such as “Nacl”.

 

TYPICAL CHARACTERISTICS： Tulsion CH-32           

  

Type： Strong base anion exchange resin

Matrix structure ：Polystyrene Copolymer

Functional group ：Quaternary Ammonium

Physical form： Moist spherical beads

Ionic form： Chloride

Screen size US  mesh： 16 to50

Particle size (minm. 95%) ：0.3 to 1.2mm

Swelling (approx.)：Cl- to OH- 12%

Moisture contents (approx)： 47 ± 3 %

Thermal stability ： 60 °C

pH range：0 to 14

Solubility： Insoluble in all common solvents

Total exchange capacity ： 1.1 meq/gm

Backwash settled density： 43 to 45 lbs/ft3 (690 to 720 g/l)

 

  TYPICAL OPERATING CONDITIONS:     Tulsion CH-32           

  

Maximum operating temperature： 60 °C (140 °F)

Resin bed depth (minm.)： 24” (600 mm)

Maximum service flow  ： 60 m3/hr/m3

Backwash expansion space：50 to 70 %

Backwash expansion flow rate at 25 °C (77 °F) ： 5 to 10 m3/hr/m2Regenerant

                                                                               NaCl

Regenerant level： 100 to 160g NaCl/l

Regenerant concentration ：5 to 10 % NaCl

Regeneration time：30 to 60 mins.

Rinse flow rate ：Slow:At regenerant flow rate

Fast                                            

At service flow rate

Rinse volume ：4 to 10 m3/m3

 

 

  TESTING：                                        

The sampling and testing of ion exchange resins is done as per standard testing procedures, namely
ASTMD-2187 and IS-7330, 1998.

  PACKING：                                              

Super sacks              1000 liters         Super sacks            35 cft
MS drums                180  liters          Fiber drums            7 cft
HDPE lined bags     25    liters          HDPE lined bags    1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These data are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are as per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on own processing equipment.