VIAIR“H”型压缩机的功能是使用空气管路和开口气动卡盘填充轮胎。 所有“H”型压缩机都配有一个板载ON / OFF开关,并配有一个不锈钢编织引导软管,在软管末端安装了一个开口快速连接螺栓。 所有“H”型压缩机必须使用适当的仪表接线安装,以确保与预期电源的距离,并且必须正确熔断以保护设备及其安装在其内部的车辆。 大多数VIAIR压缩机都配有热过载保护器,过热时会关闭设备。 冷却后,压缩机将自动重启。
注意:•始终在压缩机的最大压力等级或以下运行压缩机。 始终遵守空气压缩机的最大占空比。 超过最大额定压力和/或工作循环的操作将导致空气压缩机损坏。
250C-IG Compressor
330C-IG Compressor
450C-IG Compressor
Industrial Grade (IG) compressors are specifically designed to fill air reservoir tanks and feature a specialized head assembly that includes a newly-developed, patents pending intercooler for higher heat dissipation. All IG compressors feature outstanding sealing properties to the elements. Additionally, all IG compressors are equipped with stainless steel braided PTFE-lined leader hoses and a separate check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts. IG compressors require the use of a pressure switch that allows operation up to each compressor’s maximum working pressure as well as a relay for installation.
Note: • Always operate the compressor at or below the MAXIMUM PRESSURE RATING of the air compressor. Always observe the MAXIMUM DUTY CYCLE of the air compressor. Operation exceeding maximum pressure ratings and/or duty cycle will result in damage to the air compressor.
工业级(IG)压缩机专门设计用于填充储气罐,并配有专门的头部组件,其中包括一个新开发的,正在申请专利的中冷器,可实现更高的散热性能。 所有IG压缩机都具有出色的密封性能。 此外,所有IG压缩机都配有不锈钢编织PTFE衬里的引导软管和单独的止回阀组件,用于通过消除高电流重启的可能性来保护压缩机。 IG压缩机需要使用压力开关,以便在每个压缩机的最大工作压力下运行,以及安装继电器。
注意:•始终在压缩机的最大压力等级或以下运行压缩机。 始终遵守空气压缩机的最大占空比。 超过最大额定压力和/或工作循环的操作将导致空气压缩机损坏。