东莞市塑宇化工有限公司
| 物理性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 比重 | 1.14 g/cc | 1.14 g/cc | ISO 1183 |
| 吸水率 | 1.2 % | 1.2 % | 24 hrs; ISO 62 |
| 平衡吸湿 | 2.4 % | 2.4 % | Equilibrium at 50%rh; ISO 62 |
| 线性成型收缩率 | 0.014 cm/cm @Thickness 2.00 mm |
0.014 in/in @Thickness 0.0787 in |
ISO 294-4 |
| 线性成型收缩率，横向 | 0.016 cm/cm @Thickness 2.00 mm |
0.016 in/in @Thickness 0.0787 in |
ISO 294-4 |
| 机械性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 抗张强度(断裂) | 75.0 MPa | 10900 psi | ISO 527-2 |
| 抗张强度(屈服) | 98.0 MPa | 14200 psi | ISO 527-2 |
| 伸长率 (断裂) | 13 % | 13 % | ISO 527-2 |
| 屈服伸长率 | 4.5 % | 4.5 % | ISO 527-2 |
| 拉伸模量 | 3.80 GPa | 551 ksi | ISO 527-2 |
| 弯曲强度 | 100 MPa | 14500 psi | ISO 178 |
| 弯曲模量 | 3.20 GPa | 464 ksi | ISO 178 |
| 泊松比 | 0.40 | 0.40 | ISO 527-2 |
| 悬壁梁缺口冲击强度 | 6.00 kJ/m2 | 2.86 ft-lb/in2 | ISO 180 |
| 5.00 kJ/m2 @Temperature -30.0 °C |
2.38 ft-lb/in2 @Temperature -22.0 °F |
ISO 180 | |
| 简支梁无缺口冲击强度 | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
ISO 179/1eU |
| NB @Temperature -30.0 °C |
NB @Temperature -22.0 °F |
ISO 179/1eU | |
| 简支梁缺口冲击强度 | 0.500 J/cm2 @Temperature -30.0 °C |
2.38 ft-lb/in2 @Temperature -22.0 °F |
ISO 179/1eA |
| 0.600 J/cm2 @Temperature 23.0 °C |
2.86 ft-lb/in2 @Temperature 73.4 °F |
ISO 179/1eA |
| 电气性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 体积电阻率 | 1.00e 10 ohm-cm @Thickness 0.750 mm |
1.00e 10 ohm-cm @Thickness 0.0295 in |
IEC 60093 |
| 介电强度 | 26.0 kV/mm @Thickness 1.00 mm |
660 kV/in @Thickness 0.0394 in |
IEC 60243 |
| 耐电弧性 | 120 - 179 sec @Thickness 3.00 mm |
120 - 179 sec @Thickness 0.118 in |
ASTM D495 |
| 相比耐漏电起痕指数(CTI) | 600 V @Thickness 3.00 mm |
600 V @Thickness 0.118 in |
IEC 60112 |
| 热丝引燃 (HWI) | 7.0 - 14 sec @Thickness 0.710 mm |
7.0 - 14 sec @Thickness 0.0280 in |
UL 746 |
| 15 - 29 sec @Thickness 1.50 mm |
15 - 29 sec @Thickness 0.0591 in |
UL 746 | |
| 15 - 29 sec @Thickness 3.00 mm |
15 - 29 sec @Thickness 0.118 in |
UL 746 | |
| 高电弧燃烧指数(HAI) | >= 120 arcs @Thickness 0.710 mm |
>= 120 arcs @Thickness 0.0280 in |
UL 746 |
| >= 120 arcs @Thickness 1.50 mm |
>= 120 arcs @Thickness 0.0591 in |
UL 746 | |
| >= 120 arcs @Thickness 3.00 mm |
>= 120 arcs @Thickness 0.118 in |
UL 746 | |
| 高压电弧跟踪率，HVTR | 0.000 - 10.0 mm/min | 0.000 - 0.394 in/min | UL 746 |
| 热性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 线性热膨胀系数 | 10.0 μm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
5.56 μin/in-°F @Thickness 0.0787 in, Temperature 73.4 - 131 °F |
ISO 11359-2 |
| 线性热膨胀系数,横向流动 | 10.0 μm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
5.56 μin/in-°F @Thickness 0.0787 in, Temperature 73.4 - 131 °F |
ISO 11359-2 |
| 熔融温度 | 260 °C | 500 °F | ISO 11359-2 |
| 载荷下热变形温度(0.46 MPa) | 230 °C | 446 °F | Unannealed; ISO 75-2/B |
| 载荷下热变形温度(1.8 MPa) | 90.0 °C | 194 °F | Unannealed; ISO 75-2/A |
| UL RTI | 130 °C @Thickness 0.400 mm |
266 °F @Thickness 0.0157 in |
UL 746 |
| 130 °C @Thickness 0.710 mm |
266 °F @Thickness 0.0280 in |
UL 746 | |
| 130 °C @Thickness 1.50 mm |
266 °F @Thickness 0.0591 in |
UL 746 | |
| 130 °C @Thickness 3.00 mm |
266 °F @Thickness 0.118 in |
UL 746 | |
| UL RTI，机械冲击 | 75.0 °C @Thickness 0.400 mm |
167 °F @Thickness 0.0157 in |
UL 746 |
| 75.0 °C @Thickness 0.710 mm |
167 °F @Thickness 0.0280 in |
UL 746 | |
| 75.0 °C @Thickness 1.50 mm |
167 °F @Thickness 0.0591 in |
UL 746 | |
| 75.0 °C @Thickness 3.00 mm |
167 °F @Thickness 0.118 in |
UL 746 | |
| UL RTI，机械无冲击 | 75.0 °C @Thickness 0.400 mm |
167 °F @Thickness 0.0157 in |
UL 746 |
| 85.0 °C @Thickness 0.710 mm |
185 °F @Thickness 0.0280 in |
UL 746 | |
| 85.0 °C @Thickness 1.50 mm |
185 °F @Thickness 0.0591 in |
UL 746 | |
| 85.0 °C @Thickness 3.00 mm |
185 °F @Thickness 0.118 in |
UL 746 | |
| 可燃性(UL94) | V-2 @Thickness 0.400 mm |
V-2 @Thickness 0.0157 in |
|
| V-2 @Thickness 0.710 mm |
V-2 @Thickness 0.0280 in |
||
| V-2 @Thickness 1.50 mm |
V-2 @Thickness 0.0591 in |
||
| V-2 @Thickness 3.00 mm |
V-2 @Thickness 0.118 in |
||
| 极限氧指数 | 26 % | 26 % | ISO 4589-2 |
| 灼热丝易燃指数 | 700 °C @Thickness 0.710 mm |
1290 °F @Thickness 0.0280 in |
Ignition Temp; IEC 60695-2-12 |
| 700 °C @Thickness 1.50 mm |
1290 °F @Thickness 0.0591 in |
Ignition Temp; IEC 60695-2-12 | |
| 700 °C @Thickness 3.00 mm |
1290 °F @Thickness 0.118 in |
Ignition Temp; IEC 60695-2-12 | |
| 800 °C @Thickness 0.710 mm |
1470 °F @Thickness 0.0280 in |
Flammability Index; IEC 60695-2-12 | |
| 800 °C @Thickness 1.50 mm |
1470 °F @Thickness 0.0591 in |
Flammability Index; IEC 60695-2-12 | |
| 930 °C @Thickness 3.00 mm |
1710 °F @Thickness 0.118 in |
Flammability Index; IEC 60695-2-12 |
| 加工性能 | 额定值 (公制) | 额定值 (英制) | 测试方法 |
|---|---|---|---|
| 加工温度 | 285 - 300 °C | 545 - 572 °F | Melt |
| 料筒后部温度 | 260 - 280 °C | 500 - 536 °F | |
| 料筒中部温度 | 270 - 285 °C | 518 - 545 °F | |
| 料筒前部温度 | 280 - 290 °C | 536 - 554 °F | |
| 射嘴温度 | 280 - 300 °C | 536 - 572 °F | |
| 模具温度 | 65.0 - 95.0 °C | 149 - 203 °F | |
| 干燥温度 | <= 70.0 °C | <= 158 °F |
