A 30 H1 V30 PA66, 30%|价格|厂家|多少钱-全球塑胶网-移动端

A 30 H1 V30 PA66, 30%

Technyl®30 H1 V30 PA66，30%玻璃纤维，干燥
类别：聚合物；热塑性；尼龙；尼龙66；尼龙66，30%的玻璃纤维填充
材料说明：说明：一30h1 TECHNYL®V30是溴化阻燃聚酰胺66，与30%的玻璃纤维增强，注射成型。本产品可在自然和黑色的颜色。
优点：本产品提供优异的阻燃性能（UL 94，GWIT）结合优异的加工，机械和电气性能。
可在：亚太，欧洲，拉丁美洲和美国
法规：等级的生产或进口欧洲符合指令453／2010／EC，修订REACH指令1907／2006／EC。这种等级符合RoHS指令2002／95／EC。除非指定，这个等级是不适合于食品接触，医疗设备或玩具应用。
用途：本产品适用于家电和工业控制应用，如开关、定时器和接触器。
罗地亚罗地亚提供的信息，已收购Solvay。

A 30 H1 V30 PA66, 30%美国苏威

Physical Properties	Metric	English	Comments

Density	1.57 g/cc	0.0567 lb/in3	ISO 1183/A
Water Absorption	0.80 % @Temperature 23.0 °C, Time 86400 sec	0.80 % @Temperature 73.4 °F, Time 24.0 hour	ISO 62
Viscosity	70 cP @Shear Rate 100 1/s, Temperature 300 °C	70 cP @Shear Rate 100 1/s, Temperature 572 °F
	105 cP @Shear Rate 100 1/s, Temperature 290 °C	105 cP @Shear Rate 100 1/s, Temperature 554 °F
	120 cP @Shear Rate 100 1/s, Temperature 280 °C	120 cP @Shear Rate 100 1/s, Temperature 536 °F
Linear Mold Shrinkage	0.0063 cm/cm	0.0063 in/in	Isotropy
Linear Mold Shrinkage, Flow	0.0060 cm/cm	0.0060 in/in
Linear Mold Shrinkage, Transverse	0.0095 cm/cm	0.0095 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	130 MPa	18900 psi	ISO 527 Type 1A
	140 MPa	20300 psi	ASTM D638
Tensile Stress	45.0 MPa @Strain 0.500 %	6530 psi @Strain 0.500 %
	75.0 MPa @Strain 1.50 %	10900 psi @Strain 1.50 %
	80.0 MPa @Strain 1.00 %	11600 psi @Strain 1.00 %
Elongation at Break	2.2 %	2.2 %	ISO 527 Type 1A
	2.5 %	2.5 %	ASTM D638
Tensile Modulus	10.0 GPa	1450 ksi	ISO 527 Type 1A
Flexural Strength	200 MPa	29000 psi	ISO 178
	200 MPa	29000 psi	ASTM D790
Flexural Modulus	9.50 GPa	1380 ksi	ISO 178
	9.50 GPa	1380 ksi	ASTM D790
Izod Impact, Notched	1.15 J/cm	2.15 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	10.0 kJ/m2	4.76 ft-lb/in2	ISO 180/1eA
Charpy Impact Unnotched	4.20 J/cm2	20.0 ft-lb/in2	ISO 179/1eU
Charpy Impact, Notched	0.950 J/cm2	4.52 ft-lb/in2	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	3.3	3.3	IEC 60250
Dielectric Strength	42.0 kV/mm	1070 kV/in	IEC 60243
Dissipation Factor	0.010	0.010	IEC 60250
Comparative Tracking Index	400 V	400 V	Solution B; IEC 60112
	450 V	450 V	Solution A; IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	263 °C	505 °F	ISO 11357
Deflection Temperature at 1.8 MPa (264 psi)	226 °C	439 °F	ISO 75/Af
UL RTI, Electrical	130 °C @Thickness 0.750 mm	266 °F @Thickness 0.0295 in
	130 °C @Thickness 1.50 mm	266 °F @Thickness 0.0591 in
	130 °C @Thickness 3.00 mm	266 °F @Thickness 0.118 in
UL RTI, Mechanical with Impact	90.0 °C @Thickness 0.750 mm	194 °F @Thickness 0.0295 in
	100 °C @Thickness 1.50 mm	212 °F @Thickness 0.0591 in
	100 °C @Thickness 3.00 mm	212 °F @Thickness 0.118 in
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in	1210
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	1210
	V-0 @Thickness 3.20 mm	V-0 @Thickness 0.126 in	1210
Oxygen Index	31 %	31 %	ISO 4589
Glow Wire Test	800 °C @Thickness 0.800 mm	1470 °F @Thickness 0.0315 in	ignition temperature; ISO 60695-2-13
	825 °C @Thickness 1.60 mm	1520 °F @Thickness 0.0630 in	ignition temperature; ISO 60695-2-13
	960 °C @Thickness 0.800 mm	1760 °F @Thickness 0.0315 in	ISO 60695-2-12
	960 °C @Thickness 1.60 mm	1760 °F @Thickness 0.0630 in	ISO 60695-2-12
	960 °C @Thickness 3.20 mm	1760 °F @Thickness 0.126 in	ISO 60695-2-12

Processing Properties	Metric	English	Comments
Feed Temperature	270 - 280 °C	518 - 536 °F
Mold Temperature	70.0 - 100 °C	158 - 212 °F
Drying Temperature	80.0 °C	176 °F
Moisture Content	<= 0.20 %	<= 0.20 %

Descriptive Properties
Compression Zone	275-285°C
Fire and smoke F index	I3/F3		NF F 16 101
Mixing Zone	280-290°C

Solvay TECHNYL® eXten D 458P PA6.10, Conditioned
Solvay TECHNYL® 1011R PA6, DRY
Solvay TECHNYL® 1011R PA6, Conditioned
Solvay TECHNYL® 1015CR PA6, DRY
Solvay TECHNYL® 1015CR PA6, Conditioned
Solvay TECHNYL® 1021GF6 PA6, 30% glass fiber, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, Conditioned
Solvay TECHNYL® 2210HS PA66, DRY
Solvay TECHNYL® 2210HS PA66, Conditioned
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, DRY
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, DRY
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, DRY
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, Conditioned
Solvay TECHNYL® 2412GM05-D PA66, 38% glass fiber, DRY
Solvay TECHNYL® 2417IG PA66, 20% glass fiber, DRY
Solvay TECHNYL® 2710IR PA66, DRY
Solvay TECHNYL® 2710IR PA66, Conditioned
Solvay TECHNYL® 27010ST PA66, DRY
Solvay TECHNYL® 27010ST PA66, Conditioned
Solvay TECHNYL® 2912GMH7-P PA66, 63% glass fiber, DRY
Solvay TECHNYL® A 118L V50 PA66, 50% glass fiber, Eh 0
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, DRY
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, Conditioned
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, DRY
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, Conditioned
Solvay TECHNYL® A 205F PA66, DRY
Solvay TECHNYL® A 205F PA66, Conditioned
Solvay TECHNYL® A 208F PA66, DRY
Solvay TECHNYL® A 208F PA66, Conditioned
Solvay TECHNYL® A 208KBK-10N-L PA66, DRY
Solvay TECHNYL® A 208KBK-10N-L PA66, Conditioned
Solvay TECHNYL® A 216 NATURAL FA PA66, DRY
Solvay TECHNYL® A 216 NATURAL FA PA66, Conditioned
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, DRY
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, Conditioned
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, DRY
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, DRY
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, Conditioned

A 30 H1 V30 PA66, 30%美国苏威

18.TECHNYL PA66 A 216 S40:30%玻璃珠填料.

特点表面光洁度好低翘曲良好的压缩强度

外貌黑色本色

处理方法注塑成型

19.TECHNYL PA66 A 216 V10:10%玻璃纤维增强，注射成型。

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

20.TECHNYL PA66 A 216 V15:15％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色灰色本色

处理方法注塑成型

21.TECHNYL PA66 A 216 V20:20％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

22.TECHNYL PA66 A 216 V30:30％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

23.TECHNYL PA66 A 216 V35:聚酰胺尼龙66，35％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

A 30 H1 V30 PA66, 30%原厂原包，可提供原产地证明、COA.COC.ROHS.MSDS.UL等资料。