A 218G V33 Black 34N PA66, 25%|价格|厂家|多少钱-全球塑胶网-移动端

A 218G V33 Black 34N PA66, 25%

TECHNYL®一218克V33黑色侧的尼龙25%的玻璃纤维，干燥
类别：聚合物；热塑性；尼龙；尼龙66；尼龙66，30%的玻璃纤维填充
材料说明：描述：聚酰胺66，用25%的玻璃纤维增强，用于注塑成型。此等级显示汽车冷却液长期老化后的性能的改善保留。
可在：欧洲和北美洲
产品应用：TECHNYL®一218g1 V25黑色侧特别推荐在汽车，如冷却液体永久接触零件的注射成型：冷却和加热暖气系统，集箱，恒温元件，进口/出口管。该产品可在黑色。
罗地亚罗地亚提供的信息，已收购Solvay。

A 218G V33 Black 34N PA66, 25% 美国苏威

Physical Properties	Metric	English	Comments

Density	1.39 g/cc	0.0502 lb/in3	ISO 1183/A
Water Absorption	0.75 % @Temperature 23.0 °C, Time 86400 sec	0.75 % @Temperature 73.4 °F, Time 24.0 hour	ISO 62
Linear Mold Shrinkage, Flow	0.0108 cm/cm	0.0108 in/in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.0036 cm/cm	0.0036 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	200 MPa	29000 psi	ISO 527 Type 1A
Elongation at Break	3.4 %	3.4 %	ISO 527 Type 1A
Tensile Modulus	11.5 GPa	1670 ksi	ISO 527 Type 1A
Flexural Strength	295 MPa	42800 psi	ASTM D790
Flexural Modulus	9.50 GPa	1380 ksi	ISO 178
Izod Impact, Notched (ISO)	13.0 kJ/m2	6.19 ft-lb/in2	ISO 180/1eA
Charpy Impact Unnotched	9.20 J/cm2	43.8 ft-lb/in2	ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm2	5.71 ft-lb/in2	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+14 ohm-cm	5.00e+14 ohm-cm	IEC 60093
Surface Resistance	6.00e+14 ohm	6.00e+14 ohm	IEC 60093
Dielectric Constant	3.7	3.7	IEC 60250
Dielectric Strength	34.0 kV/mm	864 kV/in	IEC 60243
Dissipation Factor	0.010	0.010	IEC 60250
Comparative Tracking Index	450 V	450 V	IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	263 °C	505 °F	ISO 11357
Deflection Temperature at 1.8 MPa (264 psi)	250 °C	482 °F	ISO 75/Af
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	1210

Processing Properties	Metric	English	Comments
Feed Temperature	265 - 275 °C	509 - 527 °F
Mold Temperature	70.0 - 100 °C	158 - 212 °F
Drying Temperature	80.0 °C	176 °F
Moisture Content	<= 0.20 %	<= 0.20 %

Descriptive Properties
Compression Zone	270-280°C
Mixing Zone	280-290°C

Solvay TECHNYL® eXten D 458P PA6.10, Conditioned
Solvay TECHNYL® 1011R PA6, DRY
Solvay TECHNYL® 1011R PA6, Conditioned
Solvay TECHNYL® 1015CR PA6, DRY
Solvay TECHNYL® 1015CR PA6, Conditioned
Solvay TECHNYL® 1021GF6 PA6, 30% glass fiber, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, DRY
Solvay TECHNYL® 1021ST PA6, Conditioned
Solvay TECHNYL® 2210HS PA66, DRY
Solvay TECHNYL® 2210HS PA66, Conditioned
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, DRY
Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, DRY
Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, Conditioned
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, DRY
Solvay TECHNYL® 2412GHF8 PA66, 40% glass fiber, Conditioned
Solvay TECHNYL® 2412GM05-D PA66, 38% glass fiber, DRY
Solvay TECHNYL® 2417IG PA66, 20% glass fiber, DRY
Solvay TECHNYL® 2710IR PA66, DRY
Solvay TECHNYL® 2710IR PA66, Conditioned
Solvay TECHNYL® 27010ST PA66, DRY
Solvay TECHNYL® 27010ST PA66, Conditioned
Solvay TECHNYL® 2912GMH7-P PA66, 63% glass fiber, DRY
Solvay TECHNYL® A 118L V50 PA66, 50% glass fiber, Eh 0
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, DRY
Solvay TECHNYL® A 20 V25 PA66, 25% glass fiber, Conditioned
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, DRY
Solvay TECHNYL® A 20 V35 PA66, 35% glass fiber, Conditioned
Solvay TECHNYL® A 205F PA66, DRY
Solvay TECHNYL® A 205F PA66, Conditioned
Solvay TECHNYL® A 208F PA66, DRY
Solvay TECHNYL® A 208F PA66, Conditioned
Solvay TECHNYL® A 208KBK-10N-L PA66, DRY
Solvay TECHNYL® A 208KBK-10N-L PA66, Conditioned
Solvay TECHNYL® A 216 NATURAL FA PA66, DRY
Solvay TECHNYL® A 216 NATURAL FA PA66, Conditioned
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, DRY
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, Conditioned
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, DRY
Solvay TECHNYL® A 216 S40 PA66, 40% glass spheres, Conditioned
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, DRY
Solvay TECHNYL® A 216 V15 Black 21N PA66, 15% glass fiber, Conditioned

A 218G V33 Black 34N PA66, 25% 美国苏威

18.TECHNYL PA66 A 216 S40:30%玻璃珠填料.

特点表面光洁度好低翘曲良好的压缩强度

外貌黑色本色

处理方法注塑成型

19.TECHNYL PA66 A 216 V10:10%玻璃纤维增强，注射成型。

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

20.TECHNYL PA66 A 216 V15:15％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色灰色本色

处理方法注塑成型

21.TECHNYL PA66 A 216 V20:20％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

22.TECHNYL PA66 A 216 V30:30％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

23.TECHNYL PA66 A 216 V35:聚酰胺尼龙66，35％的玻璃纤维增强，注射成型

添加剂润滑剂

特点润滑

用途汽车应用建材电源/其它工具

外貌黑色可选颜色本色

处理方法注塑成型

A 218G V33 Black 34N PA66, 25% 原厂原包，可提供原产地证明、COA.COC.ROHS.MSDS.UL等资料。