友铭（国际）塑胶化工有限公司
供应:PA66 125 G Nylon 66, 25% Glass Fiber Reinforced玻纤增强
PA、尼龙Nylon结构式：
[NH(CH2)m NHCO(CH2)n-2CO]
PA、尼龙Nylon性质:
结晶性热可塑性塑料，有明显熔点，Nylon6 Tm为220~230℃，Nylon66则为260~270℃，Nylon本身 具吸水基故有吸水性，成形前须干燥，温度过高干燥则尼龙粒变色
PA、尼龙Nylon优点：
1、具高抗张强度
2、耐韧、耐冲击性特优
3、自润性、耐磨性佳、耐药品性优
4、低温特性佳
5、具自熄性
PA、尼龙Nylon缺点：
尼龙吸湿性高、长期尺寸精密度及物性受影响。
PA、尼龙Nylon用途：
电子电器： 连接器、卷线轴、计时器、护盖断路器、开关壳座
汽 车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座
工业零件： 椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输
我司在深圳,上海,廈门,温州,香港,以及台北均设有保税倉, 國內並有多處內貿倉, 长期有現貨, 方便国內外客户合同进货,以及国内企业一般贸易征税进货, 免费提供多項產品資料,環保測試, 原廠ROHS（SGS）,無卤报告,REACH,UL、物质安全表MSDS、UL黄卡及FDA认证以及原料物性表,联系电话:15016876678,15322946330.QQ:470919720
| Chem Polymer Chemlon 100 Nylon 66, Lubricated GP |
| Chem Polymer Chemlon 100 W Nylon 66, MoS2 Filled |
| Chem Polymer Chemlon 100 X Nylon 66, Lubricated GP |
| Chem Polymer Chemlon 102 Nylon 66, Nucleated |
| Chem Polymer Chemlon 104 Nylon 66, Medium Impact GP |
| Chem Polymer Chemlon 109 Nylon 66, High Impact |
| Chem Polymer Chemlon 113 G Nylon 66, 13% Glass Fiber Reinforced |
| Chem Polymer Chemlon 115 G Nylon 66, 15% Glass Fiber Reinforced |
| Chem Polymer Chemlon 125 G Nylon 66, 25% Glass Sphere Reinforced |
| Chem Polymer Chemlon 130 GVH Nylon 66, 30% Glass Fiber Reinforced |
| Chem Polymer Chemlon 133 G Nylon 66, 33% Glass Fiber Reinforced |
| Chem Polymer Chemlon 140 M Nylon 66, 40% Mineral Reinforced |
| Chem Polymer Chemlon 143 G Nylon 66, 43% Glass Fiber Reinforced |
| Chem Polymer Chemlon 182 Nylon 66, Flame Retarded |
| Chem Polymer Chemlon 104-13 G Nylon 66, 13% Glass Fiber Reinforced |
| Chem Polymer Chemlon 109-18 G Nylon 66, 18% Glass Fiber Reinforced |
| Chem Polymer Chemlon 109-33 G Nylon 66, 33% Glass Fiber Reinforced |
| Chem Polymer Chemlon 125-15 MG Nylon 66, 25% Mineral/15% Glass Fiber Reinforced |
| Chem Polymer Chemlon 206 G Nylon 6, 6% Glass Fiber Reinforced |
| Chem Polymer Chemlon 212 Nylon 6, Lubricated, GP |
| Chem Polymer Chemlon 214 G Nylon 6, 14% Glass Fiber Reinforced |
| Chem Polymer Chemlon 215 GVH Nylon 6, 15% Glass Fiber Reinforced |
| Chem Polymer Chemlon 217 GI Nylon 6, 17% Glass Fiber Reinforced |
| Chem Polymer Chemlon 218 GV Nylon 6, 18% Glass Reinforced |
| Chem Polymer Chemlon 223 Nylon 6, Nucleated |
| Chem Polymer Chemlon 225 G Nylon 6, 25% Glass Fiber Reinforced |
| Chem Polymer Chemlon 225-15 MG Nylon 6, 25% Mineral/15% Glass Fiber Reinforced |
| Chem Polymer Chemlon 233 G Nylon 6, 33% Glass Fiber Reinforced |
| Chem Polymer Chemlon 233 GI Nylon 6, 33% Glass Fiber Reinforced |
| Chem Polymer Chemlon 233 GVH Nylon 6, 33% Glass Fiber Reinforced |
| Chem Polymer Chemlon 240 G Nylon 6, 43% Glass Fiber Reinforced |
| Chem Polymer Chemlon 253 H Nylon 6, Impact Modified |
| Chem Polymer Chemlon 256 Nylon 6, Wire Jacketing Grade |
| Chem Polymer Chemlon 267 Nylon 6, Impact Modified |
| Chem Polymer Chemlon 275 Nylon 6, Copolymer Impact Modified |
| Chem Polymer Chemlon 280 Nylon 6, High Impact |
| Chem Polymer Chemlon 282 Nylon 6, Flame Retarded |
| Teknor Apex Chemlon® 253 Nylon 6, Toughened |
| Teknor Apex Chemlon® 212 Nylon 6, Unreinforced |
| Teknor Apex Chemlon® 223 Nylon 6, Unreinforced |
| Teknor Apex Chemlon® 217 GI Nylon 6, 17% Glass Fiber Reinforced |
| Teknor Apex Chemlon® 233 GI Nylon 6, 33% Glass Fiber Reinforced |
| Teknor Apex Chemlon® 225-15 MG Nylon 6, 25% Mineral Reinforced, 15% Glass Fiber Reinforced |
| Teknor Apex Chemlon® 214 GH Nylon 6, 14% Short Glass Fiber |
| Teknor Apex Chemlon® 233 GH Nylon, 6, 30% Short Glass Fiber Reinforced |
| Teknor Apex Chemlon® 240 MH Nylon 6, 40% Short Glass Fiber Reinforced |
| Teknor Apex Chemlon® 233 GVH Nylon 6, 33% Glass Fiber Reinforced |
| Teknor Apex Chemlon® 282 Nylon 6, Non-halogenated |
| Teknor Apex Chemlon® 267 Nylon 6, Impact Modified |
| Teknor Apex Chemlon® 275H Nylon 6, Copolymer, Impact Modified |
