【供应:PA6T 日本东洋 TY-791GT】 PA6T+GF55%玻纤增强

友铭塑胶一级代理TOYOBO日本东洋纺织塑料,主要代理品牌:

 

我司在深圳,上海,廈门,温州,香港,以及台北均设有保税倉, 國內並有多處內貿倉, 长期有現貨, 方便国內外客户合同进货,以及国内企业一般贸易征税进货, 免费提供多項產品資料,環保測試, 原廠ROHS（SGS）,無卤报告,REACH,UL、物质安全表MSDS、UL黄卡及FDA认证以及原料物性表

 

PA、尼龙Nylon结构式：

[NH(CH2)m NHCO(CH2)n-2CO]

PA、尼龙Nylon性质:

结晶性热可塑性塑料，有明显熔点，Nylon6 Tm为220~230℃，Nylon66则为260~270℃，Nylon本身　具吸水基故有吸水性，成形前须干燥，温度过高干燥则尼龙粒变色

PA、尼龙Nylon优点：

1、具高抗张强度
2、耐韧、耐冲击性特优
3、自润性、耐磨性佳、耐药品性优
4、低温特性佳
5、具自熄性 

PA、尼龙Nylon缺点：

尼龙吸湿性高、长期尺寸精密度及物性受影响。

PA、尼龙Nylon用途：

电子电器： 连接器、卷线轴、计时器、护盖断路器、开关壳座
汽      车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座
工业零件： 椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输 

 

【友铭塑胶代理TOYOBO如下型号】 

Classification			Major grades	Features
Non-reinforced		Nylon-6	T-802	Soft type, High-cycles
			T-803	Hard type, High-cycles
		Nylon-66	T-662	Standard type
			T-656E	High abrasion resistance
	Aromatic nylon	MXD6	T-600	Good gas-barrier properties
		6T-Nylon	TY-502NZ	High melting point
		Transparent Nylon	T-714E	Non-spherulite
	Alloy	Nylon/Olefine	NB-1700	Light weight, Low water absorption
			NB-2700	Light weight, Low water absorption
		Nylon/ Elastomer	T-222SA	Super tough
			TY-102ND	Super tough
Mineral-reinforced		Nylon-6	T-422-02	High heat resistance, High rigidity
			T-422T-TS	Good appearance
			T-423	Improved surface
			TY-145TZ	Smooth fluidity
			T-777-02	Standard plating grade
			T-779	For use in plating, High impact resistance
		Nylon-66	TY-835TC	Fine surface, Thermal discoloration resistance
	Aromatic	6T-Nylon	TY-521TN	High melting point
	Alloy	Nylon/ Olefin	NB-5620S	Light weight
			NB-5624	Light weight, Good appearance, Low water absorption
			NB-5550	Light weight, Good appearance, Low water absorption
GF reinforced		Nylon-6	T-400G15	GF15%
			T-401	GF20%
			T-402	GF30%
			T-403	GF45%
		Nylon-66	T-663G15	GF15%
			T-663G30	GF30%
			T-663G50	GF50%
	Aromatic	MXD66	T-602G30	GF30%, Good appearance
			T-602G55	GF55%, Good appearance, Good dimensional accuracy
			T-663G50A	GF50%, Good appearance
		6T-Nylon	TY-561GZ	GF35%
			TY-591GZ	GF50%
			TY-791GT	GF55%, Good finish of coating
			TY-791GQ	GF55%, Good appearance, Good weather resistance
	Alloy	Nylon/ Olefin	NB-3550	Light weight, Low water absorption
			NB-4550	Light weight, Low water absorption
		Nylon/ Elastomer	TY-181GC	GF43%, High rigidity, High toughness
CF reinforced		Nylon-6 Nylon-66	T-200	CF20%
			T-665C30	CF30%, Good electro-conductivity
GF/ Mineral reinforced		Nylon-6	T-521	High rigidity, Good dimensional accuracy
			T-530	High rigidity, Good dimensional accuracy
		MXD6	TY-391H	High rigidity, Good appearance
		6T-Nylon	TY-791HQ	Good appearance, Good weather resistance
			TY-791HT	Good finish of coating
Flame resistant	Aromatic	Nylon-6	T-808-02	Non-bleed, Non-halogen origin
			T-422VOR	Mineral reinforced, Halogen origin
			T-774FR	For use in plating, Non-halogen origin
			T-402FR	GF30%, Halogen origin
		Nylon-66	T-669VGA	GF25%, Halogen origin
			T-669VGB	GF35%, Halogen origin
			T-669VNR	Snap fitness, Halogen origin
	Aromatic	6T-Nylon	TY592GHV	GF55%, Halogen origin
	Alloy	Nylon/ Elastomer	T-669VGE	High impact resistance