商品 详情
PEEK VICOTE® 708 抗伽马辐射

¥ 0

  • ≥ 0 起订量
  • 0KG 总供应
  • 广东 东莞 所在地
东莞市众垒塑胶有限公司
产品详情

塑胶原料PEEK,聚醚醚酮PEEK,纯树脂PEEK,玻纤增强PEEK,碳纤增强PEEK,PTFE增强PEEK,导电PEEK,耐磨损PEEK,高纯度PEEK,专有填料PEEK,食品级PEEK,电镀PEEK,高强度PEEK,可焊接EEK,矿物填充PEEK,耐高温PEEK,绝缘PEEK,耐化学性PEEK,高耐热PEEK,抗辐射PEEK,耐水解PEEK,激光标记PEEK,耐磨蚀PEEK,粉状PEEK,低萃取物PEEK,涂敷应用PEEK,静电喷涂PEEK,石墨增强PEEK,医疗级PEEK,杀菌PEEK,复合物PEEK,薄膜涂敷PEEK,低摩擦PEEK,压缩模塑PEEK.

 

VICOTE® 708

聚醚醚酮

Victrex plc

产品说明:

VICOTE 708 and 709 grades are specially developed powder coatings (based on VICTREX HT™ polymer) with a higher Tg and melting point than the standard VICOTE products. VICOTE 708 and 709 grades deliver extended high temperature performance while offering all the key characteristics of standard VICOTE Coatings. Key features of VICOTE 708 and 709 grades include:

Retention of mechanical and physical properties at temperatures 30°C higher than other 700 series coatings.

Up to 3 times the wear resistance of standard 700 series coatings.

Higher levels of fatigue performance.

Higher creep modulus than standard 700 series coatings at 150°C


VICOTE 708 and 709 grade powders are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film thicknesses range from < 100 microns up to 500 microns.

VICOTE 708 and 709 grades, like other non-coating grades of VICTREX HT polymer, are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines, the coatings will exhibit the excellent properties that VICTREX HT polymer is renowned for.

High continuous use temperature of 260°C

Excellent wear abrasion and cut through resistance at these high temperatures

Excellent chemical and radiation resistance

Low level of extractables

Hydrolysis resistant

Inherently flame retardant

供货地区 

北美洲

欧洲

亚太地区

特性 

低萃取物

抗伽马辐射

良好耐磨损性

耐化学性良好

耐磨损性良好

耐疲劳性能

耐热性,中等

耐水解性

阻燃性

用途 

涂层应用

机构评级 

FDA 21 CFR 175.300

外观 

类白色

形式 

粉状

加工方法 

涂层

物理性能

额定值

单位制

测试方法

密度

1.32

g/cm³

ISO 1183

热性能

额定值

单位制

测试方法

连续使用温度

500

°F

内部方法

玻璃转化温度

315

°F

DSC

熔融温度

                     

东莞永大塑胶原料长期供应塑胶原料,货源充足,可为客户提供相应有效的报告证明、品质保证及有关性能测试报告,如:无毒证明,COA,UL黄卡,MSDS、SGS,COC。如有需要,欢迎新老客户来电咨询,

联系人:邓生 13694934262

订购热线:0769-89914118

传       真: 0769-82058794

Q        Q: 1762887032

 


SCHULATEC? PEEK CF 30 MV 14 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK CF 30 NV 12 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK GF 30 MV 14 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK GF 30 NV 12 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK MV 14 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK NV 12 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK WR 30 GRTF NATURAL 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK WR 30 MV 14 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 
SCHULATEC? PEEK WR 30 NV 12 美国舒尔曼 聚醚醚酮 A. Schulman Europe
 

 


 

 

首页 塑料原料 / 工程塑料 / 工程塑料
相关产品
店内推荐
首页
店铺
拨打电话 立即报价
发送询价单
采购商品:
采购数量:
联系信息:
公司名称:
采购说明:
 
您的询盘第一时间将不发送给其他供应商,但该供应商24 小时未响应情况下,仍将为您分配更合适供应商
图形验证:
图形验证码 换一换
验证码校验