TECAPEEK® PVX 聚醚醚酮 Ensinger Inc. 产品说明: TECAPEEK® PVX is an ultra high performance bearing material that incorporates the properties of a premium polymetric matrix material with optimum levels of specific wear enhancing additives. This formulation raises the continuous use temperature by approximately 40°F and increases the limiting PV while maintaining excellent chemical resistance. When used as a non-metallic bearing, TECAPEEK® PVX offers a superb range of tribiological performance. It is designed to run at high loads and speeds, in hostile environments, either dry or lubricated.
TECAPEEK™ PVX'S exceptional properties make it an ideal material for bearing surfaces in the most demanding applications and in the harshest conditions. Industrial, automotive, marine, nuclear, petroleum and aerospace industry applications realize great benefits from its use. 单位: 公制 | 英制
- Properties
- 加工方式
- 资料
- 视觉搜索
- 曲线数据
- 购买地点
| 产品说明 |
TECAPEEK® PVX is an ultra high performance bearing material that incorporates the properties of a premium polymetric matrix material with optimum levels of specific wear enhancing additives. This formulation raises the continuous use temperature by approximately 40°F and increases the limiting PV while maintaining excellent chemical resistance. When used as a non-metallic bearing, TECAPEEK® PVX offers a superb range of tribiological performance. It is designed to run at high loads and speeds, in hostile environments, either dry or lubricated.
TECAPEEK™ PVX'S exceptional properties make it an ideal material for bearing surfaces in the most demanding applications and in the harshest conditions. Industrial, automotive, marine, nuclear, petroleum and aerospace industry applications realize great benefits from its use. |
| 总体 |
|
| 材料状态 |
|
| 资料 1 |
- Technical Datasheet (English)
|
| 供货地区 |
|
| 添加剂 |
|
| 特性 |
|
| 用途 |
|
| 形式 |
|
| 物理性能 |
额定值 |
|
测试方法 |
| 比重 |
1.48 |
|
ASTM D792 |
| 硬度 |
额定值 |
|
测试方法 |
| 洛氏硬度 (M 级) |
85 |
|
ASTM D785 |
| 机械性能 |
额定值 |
单位制 |
测试方法 |
| 抗张强度 (屈服, 73°F) |
17300 |
psi |
ASTM D638 |
| 伸长率 (断裂, 73°F) |
2.5 |
% |
ASTM D638 |
| 弯曲模量 - 正切 (73°F) |
1.40E+6 |
psi |
ASTM D790 |
| 弯曲强度 (73°F) |
30000 |
psi |
ASTM D790 |
| 压缩强度 (73°F) |
22000 |
psi |
ASTM D695 |
| 摩擦系数 2 |
KETRON? PEEK-1000型材使用纯的聚醚醚酮树脂为原料制造，在所有KETRON? PEEK级别的塑料中韧性最好，抗冲击性最佳。KETRON? PEEK-1000的自然色塑料和黑色塑料都可以用最方便的消毒方式进行消毒(蒸汽、干燥热力、乙醚和γ射线)，并且，制造自然色KETRON? PEEK-1000型材的原材料成份符合欧盟及美国FDA关于食品适应性的规定，也符合USP标准第VI款(联邦药典)有关生物适应性规定。这些特点使之在医疗、制药和食品加工业得到非常普遍的应用。KETRON? PEEK-1000型材的原材料成份符合欧盟及美国FDA关于食品适应性的规定，也符合USP标准第VI款(联邦药典)有关生物适应性规定。这些特点使之在医疗、制药和食品加工业得到非常普遍的应用。PEEK材料概述及特性优点
PEEK是由英国威格斯公司发明专利的高性能材料，PEEK在高性能聚合物中具有其它通用塑料无法比拟非常优异的综合性能，具有适用各种苛刻环境的卓越性能，已成功广泛应用于航空航天、汽车、电子半导体、机电等各个行业中要求比较苛刻的场合。是用户进行新品开发，提高产品使用寿命及可靠性的首选材料。
如未找到您合适的型号,或者有工程技术方面的疑问，欢迎来电来人至我公司咨询,本公司工作人员竭诚为您服务!
苏州润之来塑化有限公司
手机:1 8 0 1 5 4 9 5 9 1 9
电话:0512-53128920
传真:0512-53128921
Q Q:2290759979
邮箱:rzn8866@163.com
Ketron PEEK CM HPV 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK (CM) 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK 30% GF (EXTRUSION) 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK 30% GF 聚醚醚酮 Compression Quadrant Engineering Plastic Products
Ketron PEEK CM CA30 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK LSG 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK UHP320 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-1000 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-CA30 LSG 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-CA30 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-CLASSIX LSG 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-GF30 聚醚醚酮 Quadrant Engineering Plastic Products
Ketron PEEK-HPV 聚醚醚酮 Quadrant Engineering Plastic Products
