东莞市众垒塑胶有限公司
Antistatical modified; very easy flowing Injection molding type; the antistatical effect improves, when the molded part absorbs enough humidity; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
Hostaform C 27021 AS is suggested for dissipation of minor buildup of static electricity that might occur with standard type grades. However, it is not intended for use in fuel system components where static dissipation is critical to part performance. Please refer to Celanese's ESD (electrostatic dissipative) grades for those applications
Preliminary Datasheet 单位: 公制 | 英制
- Properties
- 加工方式
- 资料
- 视觉搜索
- 曲线数据
- 购买地点
| 产品说明 | ||||
| POM copolymer Antistatical modified; very easy flowing Injection molding type; the antistatical effect improves, when the molded part absorbs enough humidity; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Hostaform C 27021 AS is suggested for dissipation of minor buildup of static electricity that might occur with standard type grades. However, it is not intended for use in fuel system components where static dissipation is critical to part performance. Please refer to Celanese's ESD (electrostatic dissipative) grades for those applications Preliminary Datasheet |
||||
| 总体 | ||||
| 材料状态 |
|
|||
| 资料 1 |
|
|||
| 搜索 UL 黄卡 |
|
|||
| 供货地区 |
|
|||
| 添加剂 |
|
|||
| 特性 |
|
|||
| RoHS 合规性 |
|
|||
| 物理性能 | 额定值 | 单位制 | 测试方法 |
| 密度 | 1.41 | g/cm³ | ISO 1183 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 25.0 | cm³/10min | ISO 1133 |
| 收缩率 | ISO 294-4 | ||
| 横向流量 | 1.8 | % | |
| 流量 | 1.9 | % |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
| 拉伸模量 | 2650 | MPa | ISO 527-2/1A/1 |
| 拉伸应力 (屈服) | 62.0 | MPa | ISO 527-2/1A/50 |
| 拉伸应变 (屈服) | 8.0 | % | ISO 527-2/1A/50 |
| 标称拉伸断裂应变 | 20 | % | ISO 527-2/1A/50 |
| 冲击性能 | 额定值 | 单位制 | 测试方法 |
| 简支梁缺口冲击强度 | ISO 179/1eA | ||
| -30°C | 4.5 | kJ/m² | |
| 23°C | 5.0 | kJ/m² | |
| 简支梁无缺口冲击强度 | ISO 179/1eU | ||
| -30°C | 120 | kJ/m² | |
| 23°C | 120 | kJ/m² |
| 热性能 | 额定值 | 单位制 | 测试方法 |
| 熔融温度 2 | 166 | °C | ISO 11357-3 |
| 线形热膨胀系数 - 流动 | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
本公司承诺所售原料均为原厂原包假一赔十
东莞永大塑胶原料有限公司
主营产品：
塑胶原料 工程塑胶 聚酰胺 PA66耐磨损 PA66超韧耐寒级 PA66食品级 PA66加玻纤 PA66增韧级 PA66阻燃防火 POM聚甲醛 高粘度POM 坚韧级POM 耐磨损POM 高韧性POM 抗紫外线POM 加玻纤POM 低翘曲POM
工程塑胶：EVA、PC、POM、PA6、PA66、PEEK、COC、PBT、PET PC/ABS、PPS、PPO、LCP；PC
热弹性体：K胶、TPE、TPR、PVC、TPU、TPV、TPX、SBS；
通用塑胶：ABS、PMMA、PP、PE、AS、HDPE、LDPE。
特种料： PEI、PTFE、PVDF
本公司所销售之塑胶原料均可提供原厂的物性表，UL MSDS SGS COC 欢迎来电咨询！
备注：公司长期销售塑胶原料/原厂原包，25千克/包，符合ROHS认证标准，25千克起。质量有保证
Celcon? POM 塑胶原料 M25 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M25UV Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M270 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M270UV Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M450 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M50 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-07 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-34 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-45H Celanese Corporation 聚甲醛（POM）共聚物
