东莞市众垒塑胶有限公司
Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; good chemical resistance to solvents, fuel and strong
alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
This grade has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposure.
The material is available in natural, black and colored.
Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more
than 1 mm.
Ranges of applications: injection molding thick-walled, void-free
molded parts; extrusion e.g. for boards and pipes.
FMVSS = Federal Motor Vehicle Safety Standard (USA) 单位: 公制 | 英制
- Properties
- 加工方式
- 资料
- 视觉搜索
- 曲线数据
- 购买地点
| 产品说明 | ||||
| POM copolymer Stiff-flowing type for injection molding and extrusion with high impact toughness and good tracking resistance over a high range of temperature; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. This grade has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposure. The material is available in natural, black and colored. Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: injection molding thick-walled, void-free molded parts; extrusion e.g. for boards and pipes. FMVSS = Federal Motor Vehicle Safety Standard (USA) |
||||
| 总体 | ||||
| 材料状态 |
|
|||
| 资料 1 |
|
|||
| 搜索 UL 黄卡 |
|
|||
| 供货地区 |
|
|||
| 添加剂 |
|
|||
| 特性 |
|
|||
| 用途 |
|
|||
| RoHS 合规性 |
|
|||
| 外观 |
|
|||
| 加工方法 |
|
|||
| 物理性能 | 额定值 | 单位制 | 测试方法 |
| 密度 | 1.41 | g/cm³ | ISO 1183 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 2.50 | cm³/10min | ISO 1133 |
| 收缩率 | ISO 294-4 | ||
| 横向流量 | 1.8 | % | |
| 流量 | 2.1 | % | |
| 吸水率 (饱和, 23°C) | 0.65 | % | ISO 62 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
| 拉伸模量 | 2600 | MPa | ISO 527-2/1A/1 |
| 拉伸应力 (屈服) | 62.0 | MPa | ISO 527-2/1A/50 |
| 拉伸应变 (屈服) | 9.0 | % | ISO 527-2/1A/50 |
| 标称拉伸断裂应变 | 32 | % | ISO 527-2/1A/50 |
| 拉伸蠕变模量 | ISO 899-1 | ||
| 1 hr | 2300 | MPa | |
| 1000 hr | 1100 | MPa | |
| 弯曲模量 (23°C) | 2500 | MPa | ISO 178 |
本公司承诺所售原料均为原厂原包假一赔十
东莞永大塑胶原料有限公司
主营产品：
塑胶原料 工程塑胶 聚酰胺 PA66耐磨损 PA66超韧耐寒级 PA66食品级 PA66加玻纤 PA66增韧级 PA66阻燃防火 POM聚甲醛 高粘度POM 坚韧级POM 耐磨损POM 高韧性POM 抗紫外线POM 加玻纤POM 低翘曲POM
工程塑胶：EVA、PC、POM、PA6、PA66、PEEK、COC、PBT、PET PC/ABS、PPS、PPO、LCP；PC
热弹性体：K胶、TPE、TPR、PVC、TPU、TPV、TPX、SBS；
通用塑胶：ABS、PMMA、PP、PE、AS、HDPE、LDPE。
特种料： PEI、PTFE、PVDF
本公司所销售之塑胶原料均可提供原厂的物性表，UL MSDS SGS COC 欢迎来电咨询！
备注：公司长期销售塑胶原料/原厂原包，25千克/包，符合ROHS认证标准，25千克起。质量有保证
Celcon? POM 塑胶原料 M25 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M25UV Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M270 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M270UV Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M450 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M50 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-07 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-34 Celanese Corporation 聚甲醛（POM）共聚物
Celcon? POM 塑胶原料 M90-45H Celanese Corporation 聚甲醛（POM）共聚物
