ExxonMobil LD 117.08 Blown|价格|厂家|多少钱-全球塑胶网-移动端

艾博（国际）塑胶进出口有限公司现货供应 ExxonMobil LD 117.08 Blown，原产原包，可随货提供原材料物性，COA,SGS.MSDS.UL黄卡等相关详细资料，欢迎来人来电咨讯

ExxonMobil LD 117.08 Blown

LD 117树脂是均聚物薄膜的树脂具有良好的透明度和良好的刚度。从LD 117树脂膜可用于包装应用的推动型的包装设备。电影由LD 117树脂可以提取到1百万计

Physical Properties	Metric	English	Comments
Density	0.929 g/cc	0.0336 lb/in3	ExxonMobil Method
Thickness	38.1 microns	1.50 mil
Melt Flow	1.6 g/10 min	1.6 g/10 min	ExxonMobil Method

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	13.3 MPa	1930 psi	at 2% offset; ASTM D882
Film Tensile Strength at Yield, TD	15.0 MPa	2170 psi	at 2% offset; ASTM D882
Film Elongation at Break, MD	170 %	170 %	ASTM D882
Film Elongation at Break, TD	550 %	550 %	ASTM D882
Film Elongation at Yield, MD	5.6 %	5.6 %	ASTM D882
Film Elongation at Yield, TD	5.0 %	5.0 %	ASTM D882
Elmendorf Tear Strength MD	250 g	250 g	ASTM D1922
Elmendorf Tear Strength TD	200 g	200 g	ASTM D1922
Elmendorf Tear Strength, MD	6.559 g/micron	166.6 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	5.248 g/micron	133.3 g/mil	ASTM D1922
Dart Drop	2.10 g/micron	53.3 g/mil	ASTM D1709
Dart Drop Test	80.0 g	0.176 lb	ASTM D1709
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Film Tensile Strength at Break, TD	20.3 MPa	2940 psi	ASTM D882
1% Secant Modulus, MD	304 MPa	44100 psi	ASTM D882
1% Secant Modulus, TD	359 MPa	52000 psi	ASTM D882

Thermal Properties	Metric	English	Comments
Melting Point	114 °C	238 °F	Peak Melting Temperature; ExxonMobil Method
Crystallization Temperature	103 °C	217 °F	ExxonMobil Method
Vicat Softening Point	105 °C	221 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Haze	6.5 %	6.5 %	ASTM D1003
Gloss	70 %	70 %	45°; ASTM D2457